Electronics Forum | Fri Apr 23 22:42:13 EDT 2004 | ethercom
Thanks for the input Pete. I am using CP4 8x2 feeders. I have tried first with 0.7mm nozzle. Although pick up was OK, the camera saw a pregnant 0402 part which is as you know is 1mm by 0.5mm. I then moved to specially made 0.6mm nozzle to minimise th
Electronics Forum | Sat May 01 15:22:39 EDT 2004 | specialed
I found through trial and error...that a special cable is needed to communicate with the csm84v. I used diagram 3 which is shown in the manual...We can upload and download files using the toolbox and Windows 3.1 It should work with Windows 95,98. The
Electronics Forum | Tue Apr 27 10:05:36 EDT 2004 | Francois Monette
Hi CT, The bake requirements for Moisture Sensitive Components are defined in table 4-1 of the joint IPC/JEDEC J-STD-033A (link for free download at http://www.cogiscan.com, click on MSD Knowledge Base/Introduction). Normally you pick the highest
Electronics Forum | Wed Apr 28 12:33:05 EDT 2004 | Dave G
Rob, Don't know if you bought an "H" tower with your UP or not. You did you can have a dedicated support plate made from Aluminum that has pockets machined out to match components on the bottom of the board. (Most of the workholder guys can set you
Electronics Forum | Fri May 14 08:07:44 EDT 2004 | cyber_wolf
Well....that's a pretty broad question. We actually run 3 fuji lines that are mid 90's vintage. We run them pretty much 24 hours a day 6 days a week.They run,run,run and hardly ever break .The software....eh..could be a little more user friendly. So
Electronics Forum | Thu May 06 13:19:57 EDT 2004 | fmonette
Hi Rob, You might want to consider changing your current procedure. Components classified MSL 4 have only a 72 hours floor life at 30C/60%RH. Even if you consider the de-rating factor (table 7-1 in J-STD-033A), at 50% this maximum exposure time wil
Electronics Forum | Sat May 08 09:59:21 EDT 2004 | fastek
What you need to remember is Fuji didn't make a name for itself by building this XP platform. They're strengths are/were in their chipshooters. Don't just assume that because it's Fuji it won't have reliabilty issues. I'm not sold on this platform ye
Electronics Forum | Wed May 12 08:16:33 EDT 2004 | solderpro
woow, slow down hot rod, hey davef, you are alright by me, good to see some one out there that has hands on experience rather than a theory nut.... any how, you need a top of the line profiler, super gold mole, or Kic.... these truly are the best and
Electronics Forum | Mon May 10 20:46:25 EDT 2004 | davef
The three basic methods you can use to restore solderability on components are: * Highly active fluxes in a retinning operation. * Surface stripping chemistry and then a standard retinning operation. * Electrochemical conversion chemistry and then a
Electronics Forum | Fri May 14 13:12:00 EDT 2004 | russ
This little bit was interesting, I posted a very similar response the other day in agrrement with newbie, I was starting to get a little ticked myself and the "going back to the basics" questions that we are starting to see more and more of. I afte