Electronics Forum | Wed Mar 11 17:51:22 EDT 2009 | GSx
Thank you so much Dave, by having different lots of PCB received (same Supllier) with suspected and good carbon ink deposit, I found useful to adopt a comparison test among the different lots by usingthe IPC-TM-650 2.4.1 Adhesion , Tape Testing (lik
Electronics Forum | Fri Mar 06 12:23:39 EST 2009 | stepheniii
Are you working for an OEM? If so see if you can get your engineering department to change their "zero orientation" for the packages. At one place I believe the CAD department called them "G codes". What was really bad there was that one shape had
Electronics Forum | Tue Mar 10 15:24:28 EDT 2009 | smellew
Rodrigo, I'm not available tonight, if you have a new servo amp change it pay special attention to the jumper settings there are 2 types of amp you can fit see drawings for info. the original info you posted, re the MTU i believe is not related but
Electronics Forum | Wed Mar 18 16:50:20 EDT 2009 | khowell
There are many users of SN100C in reflow. SN100C was originally introduced as a wave solder alloy which offered cost savings over SAC, no solder pot erosion, and high fluidity. Since it is eutectic, no plastic range, the joints have a smooth, shiny
Electronics Forum | Tue Mar 24 09:04:33 EDT 2009 | sachu_70
External CO2 extinguishers certainly help. But requires the alertness of a trained personnel to use the same effectively during a fire. I have also come across a solution wherein the extinguisher is kept always connected to continuously deliver pres
Electronics Forum | Thu Mar 26 11:29:31 EDT 2009 | cyber_wolf
I talked to Mydata service (briefly) 3 times. Halfway through the 3rd call it was suggested to me that we set up a service call. Times being what they are, we are not willing to go that route yet. Thankfully we are not in dire need of this machine ri
Electronics Forum | Thu Apr 16 13:23:41 EDT 2009 | bk
well by the looks of it you have pretty much replaced just about everything that could cause the problem. The only one i haven't seen is the cable going from the computer box up to the x-wagon boards. Just out of curiosity when you took your motor fr
Electronics Forum | Wed Mar 25 20:00:32 EDT 2009 | davef
We are not sure what you mean by "any type like plastic, aluminum, stainless steel etc?" Binks [(US Corporate Offices), ITW Industrial Finishing, 195 Internationale Blvd., Glendale Heights, IL 60139; 630-237-5000 888-992-4657 http://www.binks.com] m
Electronics Forum | Mon Mar 30 15:16:32 EDT 2009 | Peter
Hi Tom, You're right. I do find the second locating pin hardware. Now I got them both up/down when F3 is pressed. Thanks. I don't see any pin on the hardware and no edge clamp hardware either :-( , do you know any way that I can bypass these hardware
Electronics Forum | Fri Apr 03 02:15:23 EDT 2009 | roy1209
I've heard from my company's engineer that it'll be better to use Gerber format if there's some impedance control line . Because usually Gerber has code numbers in data and someone can easily refer to controlled line on the PCB and ODB++ doesn't have