Electronics Forum | Thu Jul 27 08:48:18 EDT 2006 | Chunks
I think several of us have predicted this. Once the boys at RoHS get things rolling they have nothing to do. So, why not look into bigger and better things? I like their fancy buzz name too "REACH". I guess it's an oxymoron. Didja know large amo
Electronics Forum | Tue Aug 01 22:33:36 EDT 2006 | seth
Let me ask you another question. Could this happen if either vision Y left or right not sync together? I checked the vision air regulator Left and Right it is set at 70 psi. My print is not being consistance, and I have to turn all my inspection off
Electronics Forum | Tue Aug 01 06:21:37 EDT 2006 | Rob
Hi, anyone in the UK using RAMTIFFs on their GSMs? we're having a clearout and have 2 spare, free to a good home. Also got 4 GSM feeder changeover/test trolleys - free as above. Rather they went to someone who is going to use them, than some one wh
Electronics Forum | Mon Dec 04 16:55:58 EST 2006 | Rog
Hello Dougs and Steve (the message before) I am the R from PDR. Sitting here in England browsing. Thanks for your comments. In the end, all the technologies work to some degree...but as you have found out, we have some good points. It has been 20 ye
Electronics Forum | Fri Aug 04 07:44:09 EDT 2006 | aj
Hi, Have you incorporated any Aperture Modifications in your stencil.( i.e. Homebase / 10% reductions). I have a similiar problem here with one of our high volume builds and I am in the process of ordering a new stencil with recommeded aperture red
Electronics Forum | Mon Aug 07 19:41:24 EDT 2006 | Ron
I have a PC graphics card that has a damaged component and I have no clue what it is. The other two that look identical are black flat top with which looks like a mini copper coil in the middle and two leads on each side. They are the last componen
Electronics Forum | Thu Aug 17 12:38:57 EDT 2006 | finalassy
What type of water soluable flux are you running in you selective solder machines? I know that we had to replace the ruby that the solder shoots through at the top of the fluxer once because of crystalization. That was not a cheap replacement. Doe
Electronics Forum | Thu Aug 17 09:57:16 EDT 2006 | jwn
Hi all, I need to find a solution for a problem I have. I need to replace BGAs which have been glued to a laptop board with superglue (Loctite). How can it be done without removing the pads when trying to remove the foreign glue? thanks in advance
Electronics Forum | Mon Aug 21 15:02:53 EDT 2006 | FredC
If you really have Loctite Super Glue it is a cyanoacrylate and can be removed with acetone. If you have a Loctite aneorbic glue that has not hardened yet, acetone will remove it. If an anerobic has hardened I know of nothing that will remove it. Als
Electronics Forum | Fri Aug 18 14:31:53 EDT 2006 | vikkaraja
I have humming noise comming from my Z axis motor for a while now. It faults out every so often, but not enough to stop production. I even can hear it while machine is in normal production mode. I have replaced the z servo amp. It did not help any. O
