Electronics Forum | Tue May 09 14:30:47 EDT 2023 | gwideman
I realize this request is an incredible longshot, but... Anybody happen to know the initial default username and password for ERSAsoft 2.1? We have a hard-working antique Hotflow 3, and decided to try setting up ERSAsoft for it. Comes on two floppi
Electronics Forum | Thu Jun 01 00:20:25 EDT 2023 | ultraview
We are using a Kayo-A4 SMT machine and are running across software bugs we can't seem to work around. Video here: https://youtu.be/PSobXzTtcH0 I push next and the camera goes to the correct location for part J2. Then I push test and the part is picke
Electronics Forum | Fri Jul 07 17:17:43 EDT 2023 | ttheis
We swapped the Y1 and Y2 pc800 controllers with no change. We swapped out the UIMC III-I cards from another machine with no change. VRM amps all look OK, no errors. The machine moves the head both in the x and y directions during the zeroing attemp
Electronics Forum | Fri Jul 07 17:33:25 EDT 2023 | jdengler
Since you haven't received any useful advise I will throw my 2 cents in. I do not know this machine but in general what you describe is an axis that does not get it's home pulse in time. Many machines will have an in-range sensor that gets flagged
Electronics Forum | Wed Aug 09 15:06:17 EDT 2023 | SMTA-64386426
The first thing I do when looking at a part relative to stencil design, is determine the coplanarity per the data sheet. Ideally your stencil thickness should be equal to, or if needed, greater than the coplanarity. You want the solder paste to com
Electronics Forum | Sat Sep 02 15:54:46 EDT 2023 | mekmat544
Hello, I would like to ask you for help. We have problem with our Selective Solder System SEHO PowerSelective. Problem is, that Z axis is decreasing. When we start soldering, height of Z axis is correct but after each solder cycle, there is decreasin
Electronics Forum | Mon Oct 02 11:52:22 EDT 2023 | proceng1
We have these thin and flexible sheets of fiberglass that we sometimes use to send boards through reflow that can't ride the edge hold fingers. We've had these sheets for a decade at least and have no idea what they are or where they were purchased
Electronics Forum | Tue Oct 17 03:04:22 EDT 2023 | ttheis
We don't program machines with OEM/supplier part numbers, we use an "internal" or company part number that we assign for each unique part. This internal part number can have multiple OEM part numbers (primary and alternates) associated with it depend
Electronics Forum | Fri Oct 27 15:03:29 EDT 2023 | proceng1
As Tom said, we assign internal P/Ns and list all the "approved sources". If the customer BOM includes their own internal part number, we simply add the Customer Prefix, and use their number. If they don't, we utilize 'CUS-R0001' format. This can be
Electronics Forum | Tue Mar 19 11:54:56 EDT 2024 | tommy_magyar
Hi there, I've been happy with the iiNeo and iiNeo+ from Europlacer, both have the capacity of 8*33 8mm feeders (264 slots in total). It can build boards up to 505*360 mm (our biggest PCBA, maybe it can do bigger one too). 6 and 12 monthly services
winsouce.jpg)
