Electronics Forum | Wed Sep 30 12:58:35 EDT 2009 | markhoch
I'm just throwing this out there, but is anybody manufacturing large footprint flex circuit PCBs? (I'm talking assemblies 18-36" in length) We're in the midst of quoting a new opportunity that involves several flex circuits of this size. Currently o
Electronics Forum | Thu Oct 01 16:56:40 EDT 2009 | gplume
Does anyone out there have experience soldering with Pb solder (Sn 63 or Sn 62) to SAC 305 coated PCB lands (about 50um) or Sn-Cu plated lands (about 10um). I know soldering Pb free (Sac based soler) to Pb/Sn coated lands is a no-no, but was waonderi
Electronics Forum | Thu Oct 15 16:11:50 EDT 2009 | rrpowers
We've been using Vi machines for 6 years now and love them. For us they have been quick to program, good at optimizing, and excellent at low false fail rates. The vision tools also gave us more accurate component data. We had problems with high fa
Electronics Forum | Fri Oct 23 12:41:25 EDT 2009 | stepheniii
I used Mirtec's 5 years ago. At this place we have Vi-techs. I can see why the people who recommend Vi-techs do so. They are good machines. However overall I would recommend the Mirtechs. They were faster and easier to program. And they were were a
Electronics Forum | Sat Oct 31 01:22:35 EDT 2009 | mysmt
We have performed some EDS analysis and found > high percent (approx 18% ) of Ni on surface of > gold pad. Found Tungsten as well. This is an > HTCC alumina package. Thickness of gold was > confirmed and found to be in spec. We believe > we
Electronics Forum | Tue Oct 20 19:26:10 EDT 2009 | fdbittner
I think machine selection depends upon your application (pitch, volume, changeover from pb to pb free etc...) I have experience with ERSA and Pillarhouse Jades. Both very good in their own right. Pillarhouse are relatively cheap, and quick to chan
Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany
Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >
Electronics Forum | Sat Oct 17 16:23:34 EDT 2009 | emanuel
Can anyone share some tips on cleaning pneumatic type feeders? Some feeders I have seem to be "lazy", unable to react fast enough to the the pickup heads. Someone told me to wash them in IPA, with no oiling at all, while somebody else advised to a
Electronics Forum | Tue Oct 20 17:30:15 EDT 2009 | rodrigo
Hi all, We use the IMF converter (and a floppy disk) to move programs to and from the MCS30. The only way to get to the command line in the MCS30 is to reboot and do the ctrl+shift+_ ketpresses. I wanted to try to add an entry to the Fuji User inter
Electronics Forum | Mon Oct 26 12:56:23 EDT 2009 | rgduval
Eric, Protective sleeve? The sleeving protecting the wires of the thermocouples? I bought mine direct from Heller. I think it was $90 for a set of 3 (my oven uses 3 thermocouples). They are close to thirty feet long (I'm guessing...they're much