Electronics Forum | Mon Apr 18 19:58:22 EDT 2022 | cbeneat
I had the same question. We have custom nozzles made by Count on Tools. I believe we found urethane works the best for the silicon domed LEDs. Have you slowed the feed rate down on the feeder? Also adjust the top tape to the back slot on the feeder.
Electronics Forum | Tue Apr 26 17:25:12 EDT 2022 | glasscake
I was having issues with a Mirtec MV7-U being very slow on inspection and having odd issues with graphic displays in software. Fixed it by defragging the hard drive. something like 80% of the hard drive was fragmented. Going to clone the hard drive
Electronics Forum | Thu May 12 12:59:54 EDT 2022 | spoiltforchoice
The most annoying thing about these boxes I have encountered is that nobody seems to want to keep using the same box and the same hook for more than about 5mins, some are easy to open, some make it easy to drop the setncil straight of the bottom and
Electronics Forum | Fri May 13 11:13:59 EDT 2022 | ilavu
We have all Universal Instruments placement machines and one of our customer provided placement programs as pick and place file for new job. Is there anyway to extract ascii(pick and Place) file from Juki placement programs with extension .E47 and .E
Electronics Forum | Fri May 13 22:16:16 EDT 2022 | alex22
Indeed, stickiness of LED dome varies from batch to batch. We didn't have much success with adjusting pick&mount settings. Also, usage of other nozzle (recommendation from SMT manufacturer) didn't help. Usually, we have a good experience with similar
Electronics Forum | Sun Jul 03 03:52:40 EDT 2022 | acouto
I have some engine over load problems in the central reel, has it been identified that the external team misuses talcum powder for rubbers and many times we find talcum powder in the shafts, however will it be enough to cause the engine over load? Do
Electronics Forum | Thu Jul 14 03:16:18 EDT 2022 | acouto
Thanks for the feedback, I've been having some problems with the motor overload in the conveyor and central reel whenever there is cleaning by the external company. After analyzing I always find talcum powder and lubricant (it looks like cement) on t
Electronics Forum | Fri Aug 26 10:44:37 EDT 2022 | gfe
In the Mirae machine we can give an individual delay for each component, in this case the delay in Z is in all of them, the nozzle stays on top of the component for a long time, this happens in any program, could we have accidentally changed some con
Electronics Forum | Tue Oct 11 06:52:44 EDT 2022 | gui
Hi, I have 2 SMD lines, one composed by SM 471, SM 482 and the other one by SM 482. At this point I'm trying to get an OLP to configure everything from an offline position. Some people have talked me about Samsung T-Olp but I don't know where can I
Electronics Forum | Mon Oct 24 13:17:18 EDT 2022 | micropak
I have successfully used "Offset" in pick position on a particular feeder/component on F3. My L/C is Linux 503.04 and SC software is probably 010 (RMOS). This 406, you are mentioning as Station software ? I believe you have to do it in feeder setup,
