Electronics Forum | Sun Oct 07 13:59:17 EDT 2018 | bdamico
Hello Reckless, My name is Brian D'Amico. I am the president of MIRTEC's USA Division. First of all I would check with the AOI vendor regarding any refurbished equipment they may have on hand. We at MIRTEC typically have some vintage desktop equ
Electronics Forum | Thu Nov 22 02:10:39 EST 2018 | robl
Probably just evolved - just different needs at different times. Back in the day for example there were lots of patents around turrets so different manufacturers went different ways. These have mostly run out now, so different technologies call for
Electronics Forum | Mon Dec 17 09:59:50 EST 2018 | crstarr
Hello - We have two Quad QSA-30As that won't boot. These two machines haven't been run since October (they are backup machines), and there were some heavy lightning storms that month. We think both mother boards may have been zapped. We replaced
Electronics Forum | Fri Feb 01 02:31:24 EST 2019 | sarason
You can buy an awful lot of PCB's with that budget. Having done multilayer at home for RF I would not recommend it. It took us 7 years to get a workable but I would not say reliable process running. 4 layer boards, plated through, green and silk scr
Electronics Forum | Thu Mar 28 15:53:49 EDT 2019 | SMTA-Jon
As a CM, we don’t have a lot of input on the PCB layouts we receive. Some engineers/software packages output the paste layer 1 to 1, some do an across the board reduction, and some set each part up individually with different reductions per footprin
Electronics Forum | Wed May 01 12:33:36 EDT 2019 | cyber_wolf
Depending on what you are doing, feeder cost usually outweighs the price of the pick and place machines. I have worked with almost all of the Fuji CP turret machines. I haven't touched any of the new stuff but I have seen it in person and it is impr
Electronics Forum | Wed May 15 09:33:16 EDT 2019 | kahrpr
All manufactures ratings on machines are way over blown. I am not shilling for Hanwha we have there equipment it runs good our SM471 averages 36k to 42k. there is so much that goes into how fast a machine runs such as board design type of parts, pane
Electronics Forum | Wed May 08 18:04:02 EDT 2019 | slthomas
You would have to do some extensive testing to really now for sure how much better coated blades perform than OEM blades. Deciding whether or not they last longer is just a function of regular inspections under a scope and accounting for the number
Electronics Forum | Sun Jun 09 21:10:11 EDT 2019 | don_julio
In our reflow oven it has pins which move at the predetermined speed to move the pcb through the various zones in the oven. The forward row of pins is fixed along the front of the oven. The rear set of pins is adjustable per the width of the pcb. We
Electronics Forum | Tue Nov 05 10:55:41 EST 2019 | engmagana
Hi Ameen, Did you fix it? I had the exact same problem with the same type of coil , check the images , LF solder SAC305, we have adjusted the solder apertures to the minimum solder required to have a strong joint enough to break the pad from the bo
winsouce.jpg)