Electronics Forum | Thu Sep 24 17:00:03 EDT 2009 | dogsbody
would any body be able to supply me with infomation on how to adjust a quadalign unit,as a unit on my line will not pick up 0603 resistors,but will pick up thicker 0603 caps. My manuals offer no help.I have run the aligner calibration with the cone t
Electronics Forum | Wed Sep 30 13:13:16 EDT 2009 | mikesewell
I never calculate it when I setup a profile...I have a feel for our fluxer setting and adjust based on belt speed and width. I also have different nozzles and a pressure setting to play with. Inspect the bottom of the board for good coverage. Runn
Electronics Forum | Thu Nov 19 14:35:02 EST 2009 | rrpowers
We do continuous reel-to-reel flex circuit PCB's with a typical "panel" width being 12". (The PCB pattern repeats every 12".) We have done some product that was 24" by doing one half of the board then the other through the screen printer. We have
Electronics Forum | Thu Oct 08 11:33:16 EDT 2009 | cab
We are currently wirebonding MCMs with surface components located in very close proximity to wirebond pads, which are gold plated. We are ball bonding with 99.99% Au wire. Normally we do not have problems, however if product has been reflowed seve
Electronics Forum | Wed Oct 28 19:48:33 EDT 2009 | lgroves
Hi, The machine is a Samsung CP45FV-Neo. Is > there a way to set the level of control operators > have over a program? We'd like to have a program > which can't be changed, except by a technician. I > can't see any way of doing this with the mach
Electronics Forum | Tue Jan 12 21:24:13 EST 2010 | graceytiu07
We have a Viscom SPI S3054QS. Yup, the machine offers a quite good speed. My board dimension is 150 by 250mm. The cycle time is only about 24 sec. The analyze time is only about 10sec. You can make your loading faster, if that's what you needed. I ha
Electronics Forum | Mon Oct 19 12:17:16 EDT 2009 | wrongway
We have yet had the need to use local fids on our boards you must be putting down pretty fine pitch parts that are needing the acurcey if it is failing fids that are within the search area then maybe its somthing else size our lighting it should fin
Electronics Forum | Mon Oct 19 19:40:34 EDT 2009 | swag
Thanks for the input. These are 80 pin fine pitch connectors on arrayed flex circuits. We have found from experimenting there is really no good alternative but to use local fids. I found what I'm doing wrong - I needed to move fid finds and correc
Electronics Forum | Tue Oct 27 13:56:36 EDT 2009 | julie331975
I work for a CEM. We are having some quality issues with some pcb's that came from China. (I know, big surprise) Can anyone with pcb manufacturing experience look at some pictures I have and give me an opinion as to what could go wrong in the pcb man
Electronics Forum | Tue Nov 10 17:23:51 EST 2009 | gregcr
GSM's are only 500 to register with UIC. There are a ton of GSMI's around. We have always run chipshooters with GSM's and now the new Advantis machines from UIC. GSM's are very accurate, but a bit of a pain if your running lots of chips (thus we r