Electronics Forum | Tue Jan 25 13:28:51 EST 2005 | Ron Stubblefield
HELP!! I need an exploded view of the early-style (AP-20 and some 24's) camera cube. I have bought a used AP-36 and am having vision problems. I also need the cube alignment procedures if anyone has them. I already have a "C" tool. Thanks Ron ro
Electronics Forum | Wed Jan 26 05:24:56 EST 2005 | SLVito
Morning All, I have to choice between two axial through hole machines: Panasert AVK 3 and Universal VCD Sequencer 8. I will insert axial components with 0,45 mm to 0,8 mm component lead diameter and perform jumper wire insertion in the same machine.
Electronics Forum | Mon Jan 31 07:01:25 EST 2005 | EHess
Run a water-soluble mask that foams in the wash. Use a de-foamer to contol that. One or the other, or both are causing a greasy build-up that is hard to get off in certain areas. I have a closed loop DI water system. Can I use some sort of deterg
Electronics Forum | Wed Feb 09 11:37:26 EST 2005 | pjc
Technical support cannot help with this issue, especially Electrovert tech support, those guys only know soldering and cleaning machines. Contact Jim Kaler at Camalot Applications Support: 603-641-8666 ex7208 or jkaler@speedlinetech.com Tech support
Electronics Forum | Tue Mar 01 14:47:07 EST 2005 | Alex
I've just went thru cleaning all nozzles and I saw some of them stuck up. The reason for mine is that they're on the way out, between lock and the exit notch. I tried to reinstall them with the spring "forcing" the nozzle clockwise. Sound weird but I
Electronics Forum | Thu Mar 03 11:10:20 EST 2005 | Dougs
I'm telling you i've bought the nozzles wound the wrong way and it helped, no more probs with nozzles sticking, i'd tried buying fuji nozzles, checked all my component heights, set Z0 properly, checked shaft heights, set up st1, etc etc but the new s
Electronics Forum | Mon Feb 21 08:23:31 EST 2005 | pemnut
Gee Paul, the first two responses to this post where people fishing for info. I would love to help out on this one, but we all have nothing to work with. Can't troubleshoot without knowing the problem. Please feel free to write a 30 page solution abo
Electronics Forum | Wed Mar 02 11:57:10 EST 2005 | Rob
Hi Dave, Thanks for the info, it will be helpful. Planning on trying it on a number of finishes, and have arranged for some samples of the adhesive - Loctite 3880 to start with. Have discovered something important already though - why not many peo
Electronics Forum | Wed Feb 23 14:09:50 EST 2005 | c.b
thank you that was really helpful, i thought this was a grown up forum, at the moment i am finding it a little difficult to get technical support as not many service engineers support these old quads. So if a grown up out there has any contact name
Electronics Forum | Fri May 27 16:27:12 EDT 2005 | michaelmcclay
I believe it read Quad 1000 on the machine ID label. The serial number of the machine is 9518-A-02. The operator changed some settings in the configuration file and I need to get that back to the original settings. Any help you can offer would be