Electronics Forum | Tue Oct 07 01:08:23 EDT 2008 | snsmt
So i have a pcb that is not panelized and it is a single pcb. The problem is that the pcb is small, so it needs to be on a fixture for it to go through the topaz-x machine. The xy data that the customer provided is for the pcb only. How do i include
Electronics Forum | Tue Oct 07 15:08:47 EDT 2008 | dphilbrick
I have a job that requires a minimum of 3% lead in all component terminations. Anyone doing DOD out there with the same? How do you get around this with R's and C's especially? I believe we would be OK if the terminations were not pure tin as well bu
Electronics Forum | Wed Oct 08 15:06:32 EDT 2008 | sambolian
I knew I was doing everything right! I haven't forgot after all. That's exactly what I did, but I still get the error of "Fiducials not taught". I thought that maybe I was forgetting something, but that's not the case :( Maybe I have a bug in my soft
Electronics Forum | Tue Oct 14 10:03:17 EDT 2008 | dwelch123
The bread pans are stackable, same size at top but smaller at the bottom. I also do this inside the solder wave. Just press the other bread pan on top of the other. It helps to have some guns on you, some little stick boy might not squeeze enough, bu
Electronics Forum | Thu Oct 16 09:49:29 EDT 2008 | slthomas
Sorry...I was depending on the formatting to indicate that my comments were in response to qdp's comments. Whether he/she likes it or not, your process is probably well entrenched and you were asking for help with it. I didn't think his opinion as
Electronics Forum | Wed Oct 15 15:40:21 EDT 2008 | stepheniii
255 shuts it off, but if I remember correctly 254 still uses vision but passes almost everything? You might want to give 254 a try before resorting to 255. I believe 254 will still correct some pickup offsets. And iirc 255 isn't in the manual but so
Electronics Forum | Fri Oct 17 04:23:51 EDT 2008 | fujiphil
Check the image using the fast inching [F] and axis selection [2]. After vision error, press [F] then [2]. The monitor will display a binary images. You will now have a visual look on how the error occurs. Adjust the CCD level of the camera until you
Electronics Forum | Fri Oct 17 06:24:44 EDT 2008 | tegel
Hi, When you tried vision type 254, did you change the size of the body? On 254 the body size should be the outer dimension of a component, so on a PLCC (or any other component) the leads should be included in the body size as well. One other thing r
Electronics Forum | Thu Oct 23 11:11:46 EDT 2008 | bobpan
Ok, been a long time so dont quote me on this.....but i think you have to go into assembler configuration and change a number that is located under each assembler to its own number....ex....assembler 1 assembler 2 . They probably both have a 1 at t
Electronics Forum | Thu Oct 23 11:30:08 EDT 2008 | bobpan
I think there is an option to select that says breakup programs for seperate central controllers.....but i cant remember where it is. Maybe you can find it.....I dont have a manual or the software anymore and my brain has shrunk a bit since the late
.gif)
