Electronics Forum | Thu Jul 18 18:32:18 EDT 2013 | rway
Hello all, I was wondering who out there has an F1 or F1-5 system used at post-paste. If so, what type of auto-insertion equipment are you using on that line and what is the cph placement capability. Does your F1 system keep up with the cycle time
Electronics Forum | Mon Aug 26 00:17:32 EDT 2013 | alexeis
Hi, After you got datasheets of component shapes (only new one) and enter it to SMT machine library (including Polarity Mark and Position), you can use our software to simulate and fix all angles. Also, our software has tools to add Polarity informa
Electronics Forum | Mon Oct 14 12:39:38 EDT 2013 | lkavan
Dear friends, I have another question about Tenryu MT5530. There is a wrong software on PCMCIA memory card in one machine. Can you help me how to read and write this card. I tried to insert it into notebook PCMCIA slot and it doesn't work, Windows ca
Electronics Forum | Sat Sep 27 21:44:12 EDT 2014 | isd_jwendell
A rejected part from a reel is a little bit of a pain to use, where a rejected part from a tube is easy. That doesn't mean that I like tubes though. I have also found that some parts cost more when delivered on tape. First check that your machine is
Electronics Forum | Wed Oct 01 15:24:55 EDT 2014 | horchak
are you trying to lengthen or shorten the lead length? Lengthening the amount of lead being cut off and going into the scrap tube will shorten the lead length. Lead length is pretty much determined by the down stop setting on the insertion head, the
Electronics Forum | Thu Oct 09 17:50:39 EDT 2014 | joe98375
Greetings, We have a very old IC insertion machine mentioned in the subject line. The system seems to have lost all communication between the computer and the machine. The connections between them are good and I do not see any signs of electrical da
Electronics Forum | Fri Oct 17 15:23:28 EDT 2014 | davef
First, don't exceed the maximum temperature of the battery, say 85*C [I don't know your specifics] Second, don't short the terminals of the battery. Third, the best way to wave solder a battery is: * Insert an insulating tab between the battery an
Electronics Forum | Tue Dec 02 18:29:23 EST 2014 | jorge_quijano
Hola, here is a question that may be answered by common sense, but I'd like to hear from you; I have a couple of SMT lines, and I'm constantly changing from leaded to lead-free process and backwards, so, I cannot dedicate one line for leaded and ano
Electronics Forum | Wed Mar 02 18:27:36 EST 2016 | hlabs
I purchased a Phillips CSM 84V III for a backup machine several years ago and finally getting around to setting it up. When the floppy is inserted for loading the USER.MCH (also the .FDR and .VIS files) the screen reads file not found but is on the f
Electronics Forum | Tue Jul 05 18:24:50 EDT 2016 | padawanlinuxero
Hi have you try to use some type of adhesive like loctite or a solder mask to avoid lifted components, we use both in 2 different products, we use loctite to avoid a hall inserted in a plastic carrier, lift when being solder in the solder wave, the s