Electronics Forum: interflux (Page 1 of 4)

Flux Designations and Composition

Electronics Forum | Wed Jul 07 17:55:18 EDT 2004 | davef

Another thought, why not contact a flux supplier that is able to give you the background information you seek? For instance: Daniel Werkhoven; Interflux Electronics/Belgium [ http://www.interflux-electronics.com ] [We have no relationship, nor rec

yellow residue

Electronics Forum | Tue Aug 22 21:11:10 EDT 2006 | davef

We agree with Russ. Your topside should be 100 - 130*C. Your 265*F is at the top of the range. Look here: http://www.interflux-electronics.com/Products/Fluxes/IF%202005M/TD%20IF%202005M.pdf#search=%22Interflux%20IF%202005%22

Solder mask thickness measurement

Electronics Forum | Wed Jul 06 09:28:00 EDT 2016 | smtbroker

Hi Pavel here in Poland interflux sells a product C8 who can remowe the solder mask, no disolve. It is a high alcalin product with other stuff, you can ask to vsd@interflux.pl jean vadim

QFP144 soldering problem

Electronics Forum | Tue Sep 25 14:43:28 EDT 2007 | mun4o

Hi, we change Kester with Interflux and all it is OK.The problem was paste Regards

ive solder profiles

Electronics Forum | Tue Sep 02 15:40:58 EDT 2008 | bvdl

use the 2009MLF from Interflux it will take away your solder balls. this is a known issue.

Protection of the component in the double Wave

Electronics Forum | Thu Jun 20 08:47:51 EDT 2002 | Patrick

I would suggest you try the acrypeel 2000 peelable mask from Interflux USA. Try this link for more info http://www.interfluxusa.com/Datasheets/Acrypeel2000.htm Good Luck

No Clean Selective Solder

Electronics Forum | Wed Jul 31 10:55:06 EDT 2002 | patrickbruneel

Christopher, Is it possible to get some more info like type of no-clean flux you use and process parameters topside temp of board before entering the wave and dwell time in the wave. Patrick Interflux USA, Inc.

yellow residue

Electronics Forum | Tue Aug 22 16:46:31 EDT 2006 | Steve

Using Interflux IF2005, Have electrovert as well as new Novastar Topside of board temp is 265F solder bath 275c. I assume applying via foam fluxer. Not sure.

Dispenser Valve Cleaner/Conditioner

Electronics Forum | Tue Dec 30 10:27:49 EST 2014 | Anon

So far I know of two dispensing system cleaner and conditioner to purge the solder paste out to preserve the valve. Valve Purge from EFD Nordson and Purgel from Interflux. Are there any other alternatives for purging and cleaning dispensing systems?

What flux are you using for spray/ dropjet (Selective Solder)

Electronics Forum | Fri Nov 29 09:45:39 EST 2019 | surfacemountprocess

Have used Interflux 2005C in a Ersaflow 3-45 and happy with the results

  1 2 3 4 Next

interflux searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

Software for SMT placement & AOI - Free Download.
pressure curing ovens

Training online, at your facility, or at one of our worldwide training centers"
Void Free Reflow Soldering

Easily dispense fine pitch components with ±25µm positioning accuracy.
thru hole soldering and selective soldering needs

Benchtop Fluid Dispenser
PCB separator

Private label coffee for your company - your logo & message on each bag!