Electronics Forum | Fri Jan 05 07:38:52 EST 2007 | John Burris
I would concur with the above comments. We have used Juki/Zevatech from the 570L model on and run a full complement of 700 series machines. I have a 10 year old 730 machine that still cranks out product every day over two shifts without problems. Yo
Electronics Forum | Fri Sep 19 10:24:10 EDT 2008 | jtownsend
I am looking to replace our current smt line of a Contact 3S. This has been our only machine and we have had it for about 6 years. We are looking for 100 plus feeder capacity and 10k plus placement rate with a diverse component range. I am considerin
Electronics Forum | Tue Jan 05 20:21:40 EST 2010 | steinerson
Hi Jeff I would recommend you to try unexpensive user friendly Juki Late Model KE760 series. you need a flexible machine that can handle components,fine pitch QFP. This machine is very unique. you can use even without an offline software optimizer,
Electronics Forum | Fri Apr 06 02:17:15 EDT 2018 | rob
@ Sr.Tech, Most of our Chinese spares are Juki & Yamaha original & still bagged, just much cheaper. They wouldn't sell machines in China if all the spares and consumables were at European mark ups. Nozzle wise the Juki 750 & 760 copies are not 100%
Electronics Forum | Wed Mar 28 02:27:29 EDT 2018 | robl
Hi Reckless, Depends on model of Samsung & Juki. For example you talked earlier of a Juki 750 compared to an Assembleon Opal Xii, which were different generations - a fair comparison would have been a Juki 2060 to an Opal Xii. Same with the Samsu
Electronics Forum | Wed Apr 10 22:15:58 EDT 2019 | kylehunter
So after listening to many people's options and thoughts, I have decided against novastar. There is a reseller near my office that offers full support, training, and service on used equipment. They also fully refurbish all equipment beforehand. I no
Electronics Forum | Mon Aug 24 17:05:51 EDT 2020 | kumarb
Aurash, we own Yamaha machinery but just throwing it out there...are the movements of the motors smooth or with friction? Is it possible that the linear screw rods (as in our machinery) require to be lubricated? There are special lubricants for each
Electronics Forum | Thu Jul 01 16:02:45 EDT 2021 | willkillum
Greetings. Make sure the calibration/homing chip is still with the machine and not lost, although you can buy a replacement from Juki for a not-so-nominal fee. Also, have the seller power it up and bring up the Laser image display/edge check. If ther
Electronics Forum | Fri Jul 29 06:48:11 EDT 2022 | jojoled
I have old JUKI machine, which after power loss seems to have corupted configuration file(all works fine,except Vision configuration for fiducial recognition : camera is unable to read/ write parameters for Vision), can anybody help to tell which fil
Electronics Forum | Sun Jun 17 09:48:05 EDT 2018 | sarason
I presume the dongles you talk about are for an application called HLC from JUKI. The 2 different versions are for the later 2000 and 3300 and FX series the other key for the older 700 series. There is another way to solve your problem. AN applicatio
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
