Electronics Forum | Tue Apr 27 23:10:16 EDT 2010 | mbrunton
I am looking at buying a pick and place machine to assemble the circuit boards we make. Most of the boards are small (2 to 10 square inches), most are 2 sided, and have maybe 20-50 parts per side. I use mostly 0805/0603 chips, SOT-23, SOD-123, SOIC
Electronics Forum | Thu May 20 16:22:07 EDT 2010 | remullis
I just got word from my board designer that the actual pad size is 11.8 mil and he is reducing the paste layer to 7.8 mil. To me this is way to much of a reduction. I am was accustomed to doing 20% reduction on any thing 20mil pitch or less. The scre
Electronics Forum | Tue May 25 12:43:00 EDT 2010 | jmedernach
I don't have experience with 1B73. I do have a ton of experience with CE-1155. There are a couple of gotchas with this material. First and foremost is that it HATES silicone residue. If the material is not sticking to parts and they aren't cerami
Electronics Forum | Fri May 28 13:44:15 EDT 2010 | emrtech
good point Sibbe, we also do a lot of engineering and changes from rev and having to order a new screen very time is a pain and money spent. no more having to wait for a screen to keep production running. has anyone been working with a solder jet pri
Electronics Forum | Thu Jun 10 16:51:01 EDT 2010 | daxman
Hi Manuel, We've been placing QFN's with our CP6's for a long time now. We use vision type 10 just like you describe. I wouldn't bother with front lighting & trying to pick up the leads. Inspecting the leads doesn't provide better accuracy. I would
Electronics Forum | Mon May 31 11:08:28 EDT 2010 | padawanlinuxero
Hello I am having problems with the hydra camera, I start getting an error message saying that the camera couldnt look at the fiducials on the hydra, I went to the camera in service and turn it on to see the problem but I found out that the real pr
Electronics Forum | Thu Jun 24 04:06:33 EDT 2010 | yesobamaa
Free site for you to sell/buy items and more I would like to share with you guys a good free site: http://www.topbuysell.com which I came across. It is completely free to register a membership and publish your buying/selling items free of charge. C
Electronics Forum | Thu Jun 24 09:39:50 EDT 2010 | mts
Hi there, this is my first post in this forum, so greets to all the people. Here my question: We have bought a used juki FM740 and the machine is working fine. To reduce programming-time we would like to export our placement-data from PADS to the j
Electronics Forum | Tue Jun 29 14:45:42 EDT 2010 | smt_guy
Hi, Maybe you guys can share your 2 cents here.... I have 3 lines of SMT Machines and I want my most common parts (components) and cheap parts like 5 cents per part and below)to be warehoused or stored in my manufacturing floor under production con
Electronics Forum | Tue Jun 29 20:50:20 EDT 2010 | davef
For day-to-day production, you're going to need to document that you've: * Pulled an item from floor stock * Returned an item back to floor stock ... not everyone is capable of doing that process. Currently, you have an established in-bound material
.png)
