Electronics Forum | Thu May 14 10:50:14 EDT 2009 | dnachristen
Hello, New to the site here. Have a few questions regarding Philips (Assembleon) Equipment and program transfer. We need the ability to transfer "Golden Programs" to and from the machines. I'm currently using AMS 2.0 with line control. I hooked up
Electronics Forum | Thu Nov 19 11:43:13 EST 2009 | tpappano
Hi Jeffrey, I bought my first used p&p last year, and I wholeheartedly agree the process of picking out one of these things is daunting! I am a small OEM with a strong tendency toward vertical integration. I'm just not satisfied unless I control a
Electronics Forum | Thu Jun 13 08:32:24 EDT 2013 | rway
Have you verified the measurements on the bench with an LCR meter? Chances are you are experiencing aging with these ceramic caps. We have similar issues with X5R and X7R caps. You will see the effects of aging with returns from the field as well
Electronics Forum | Wed Feb 26 13:23:40 EST 2020 | rgduval
I haven't used these clips, or this machine, so... But..in general, I'd use as large a nozzle as you can that fits the pick area of the clip. That should give you the best opportunity at lifting the clip. If the machine has a gripper nozzle (with
Electronics Forum | Fri Mar 23 09:28:46 EST 2001 | PeteC
Well, it's hard to say what it started out as, a smear, splash or ball cause the solder formation on the finger after reflow is spread out ya know. I looked at an archive for possible causes and one was printer operators with paste on their fingers.
Electronics Forum | Wed Oct 27 07:38:08 EDT 1999 | Mario
Hi Jerry, I have a solution for you which I have done myself and shown to others which should cost you less than 100$ if you already have a microscope.This is still an operator job and an automated operation. You need two mirror squares (about 4inc
Electronics Forum | Thu Oct 07 03:19:33 EDT 1999 | Chris May
| Our first article inspection after machine placement can take several hours depending on the complexity of the board. The operator visually checks the board against the drawing and bill of material. I'd be interested to hear if there are any other
Electronics Forum | Thu Aug 12 22:31:10 EDT 1999 | Dave F
| Hello, | | Can any netters suggest what critical parameters should be considered & what are there assoicated impacts for a solder paste printing process ... | | B.Regards, | Felix | Felix: There are some 30 variables that affect SMT solder qua
Electronics Forum | Thu May 13 00:34:49 EDT 1999 | Jeff Sanchez
| WARNING: This is a plug. | | I have read post on this site where the question is raised: "My machine can do 80 units per hour, but I am only getting 35 - WHY?" | | Well I have written w95/database code that reads FUJI output files (CPII,CPII,IP2
Electronics Forum | Thu May 13 09:41:25 EDT 1999 | Chrys Shea
| | WARNING: This is a plug. | | | | I have read post on this site where the question is raised: "My machine can do 80 units per hour, but I am only getting 35 - WHY?" | | | | Well I have written w95/database code that reads FUJI output files (CPII