.gif)
Electronics Forum | Mon Nov 23 23:13:53 EST 2009 | wyko007
I recently purchased a CSM84VZ Type PA130460. The machine did not come with any reference material and its a pain learning by creating errors. Can anyone share with me any related material that is necessary to get the tool running smooth. Thanks in a
Electronics Forum | Sat May 26 00:32:55 EDT 2007 | crashoveride
it'll be cheaper if you'll let your wave machine up all night and let it in its idle temp (supposed to be 200��C) simply because it will need less power from idle temp up to operational temp compared to from 0�C-operational temp. Temperature Sensors
Electronics Forum | Fri May 18 07:38:25 EDT 2007 | realchunks
Hi Bart, I would suggest MyData. They are good for protos because they are very flexible. You can use strips of parts with no leaders. This is huge unless your customer / company deals with nothing but full reels. You can even teach it to pick u
Electronics Forum | Mon May 21 14:20:29 EDT 2007 | rons
A My-9 which will hold 96 8mm will run you $150K. That's a refurbed unit directly from Mydata with feeders (magazines) and warrenty. I know because I recently priced one out. The Tp series is much cheaper in price but you sacrifice speed if that is
Electronics Forum | Thu May 24 22:10:38 EDT 2007 | john3140
Selective!If you are considering a Selective machine you must not be worried about thru put. If you want to keep the same thru put as what you were getting out of the Soltec Wave but want better software....you should give a Vectra ES a try. Its manu
Electronics Forum | Mon Jun 25 04:43:54 EDT 2007 | andras
Hi Jon, Thanks for the dimensions. It is quite larger than CSM66, so I haven't got chance to buy 84. You are very "lucky" because you "only" had to cut a bigger hole for it. My workshop is "under" the ground, in the cellar,so I had to explode my mac
Electronics Forum | Thu Jun 14 01:47:23 EDT 2007 | pavel_murtishev
Good morning, Glue printing and glue dispensing processes have their pros and cons. Speed is main glue printing process �pro�. A-n-y dispenser will be slower if you replace your DEK with it. Your placement machines do not wait, right? So I wonder wh
Electronics Forum | Sun Jun 17 12:57:53 EDT 2007 | slthomas
I was wondering about a bottle neck at the oven too, but apparently you don't have that problem. Are the boards small enough that you can put more on a panel? Other than that, it does sound like you need another printer feeding your placement machin
Electronics Forum | Wed Jun 13 19:03:17 EDT 2007 | sueph
Need some advice. A relay in the Ol' Treiber went out to the wave solder pot, causing the temp of the pot to spike up to 800 degrees F. Since the machine wasn't in use that afternoon, it is possible that the pot was that hot for 4 hours before it wa
Electronics Forum | Tue Jun 19 11:28:10 EDT 2007 | kpm135
I am fairly new to the MYData machine. The TP11 we have just started generating the following error: W-MIPR-20:System voltage BATTERY measured 14.59V (outside limits). After talking with the operators and reading the manual I believe the problem may
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477
