Electronics Forum | Thu Jul 07 23:43:31 EDT 2022 | tey422
We been using the Sayaka SAM-CT23Q machine to depanel PCB, it was fine. But now, we have to depanel the Aluminum PCBs the current bits from IMPEC we are using are not strong enough (1.5x8.0 diamond downcut). Need to find much strong bit or bits des
Electronics Forum | Mon Jul 11 18:02:27 EDT 2022 | tey422
Yes, just tabs not full perimeter. Can you please fill me in more detail since I am not too familiar to router bit types? I am looking for the right size bit that would be able to install to the Sayaka machine without much trouble just like diamond
Electronics Forum | Fri Jul 15 12:15:08 EDT 2022 | aj3
Does anyone have any documentation or knowledge about the S3088-III or 3088 Basic Viscom AOI machines? I am trying to determine if I can pass the data it outputs to a 3rd party vendor, and I need to know the connection method (local network, internet
Electronics Forum | Tue Jul 19 01:53:53 EDT 2022 | ttheis
We are in process of calibrating one of our GSM machines; we were able to successfully calibrate the front and rear ULC's but when we moved on to calibrate the head we get a spindle runout error midway through the routine (pic attached.) The spindles
Electronics Forum | Tue Jul 19 14:03:03 EDT 2022 | ttheis
Reading up I see there is a fixture (part# 1212100) but I am not able to find any information on this. Has anyone ever adjusted the focus of the PEC camera? Anyone know what this fixture looks like? One of our machines is out of focus but still able
Electronics Forum | Tue Jul 26 13:34:18 EDT 2022 | emeto
10x6 to 12x8 is ideal for most equipment. Too small panel is not good too for handling by humans and machines. 1.6mm you can use as and depanel on the router. 0.6mm you might need to run on SMT carrier, if you see warping.
Electronics Forum | Mon Aug 01 12:52:52 EDT 2022 | jojoled
Hi , I am lookingt for somebody who can confirm or definitely reject my expectations...one guy, with some experience with JUKI 740 said, the 740 model it had, and it worked fine....so he is surprised why the newer machine doesnt have it....maybedisab
Electronics Forum | Mon Aug 01 15:54:27 EDT 2022 | tey422
I ran those KE750 & KE760 machines more than 5 years ago. As I recall, it can do some sort of gang pick, just not fully simultaneously. It picks with one head first then, it picks up with the 2nd head with minor delay after the 1st pick.
Electronics Forum | Mon Aug 08 20:27:34 EDT 2022 | stephendo
It depends on what you will be building and your customer`s requirements. You many need an X-ray machine. You will almost certainly want magnifier lenses with ring lights. And you will probably never have enough binocular microscopes. You will also
Electronics Forum | Sun Aug 21 15:35:22 EDT 2022 | zadir
good afternoon, please tell me, maybe someone has encountered a problem on the juki 730/740 machine.we have a 24 volt 10 amp power supply broken on it (it stopped turning on completely) we changed it, but now stanou can't find the zero point, he come
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477
