Electronics Forum | Fri Oct 16 20:12:33 EDT 2015 | billthebuilder
I ended up just making a new test board as we had some specific PnP abilities we wanted to test, but I did follow up on your link and got a quote. The dummy components were way cheaper than what we bought from Digikey or what I saw on Topline. This w
Electronics Forum | Mon Oct 26 10:56:00 EDT 2015 | dyoungquist
We buy stencils from Stencils Unlimited (stencilsunlimited.com) which is the sister company to PCB unlimited. Stencils Unlimited will be the ones making the stencil if you order the pcbs with PCB Unlimited. We have never ordered pcbs from them so I
Electronics Forum | Tue Oct 27 07:09:37 EDT 2015 | prameel_84
Hi Everyone, I got an approval to buy a Ionic Contamination Tester in my company, hence i require expert advise to proceed further for machine procurement At present I've fixed for Zero-Ion G3 Ionic Contamination of Aqueous Technologies and SMD V T
Electronics Forum | Thu Oct 29 13:55:57 EDT 2015 | edgeflex
Hi, Since we change the small best of the head carriage, the head is not going to the right positions (paste/front/rear). I could not even make a pressure test. Anyway I don't have any error message. Does somebody knows something about this and ho
Electronics Forum | Sun Nov 08 17:04:26 EST 2015 | ttheis
Thank you very much for sharing this information. It is difficult to gain knowledge in this area independently. I'll contact Kester for information on adjusting the flux density and which "thinner" to use since I am using their flux. I really like
Electronics Forum | Fri Dec 11 19:59:40 EST 2015 | dontfeedphils
What exactly are you looking to verify? Following the manufactures recommended schedule for calibration should be enough. Another option is many AOIs have an option to run a bare board, when doing this it will invert what it's looking for, so every
Electronics Forum | Mon Nov 30 02:15:29 EST 2015 | andrei8686
For PCB prototype, I strongly recommend pcbway(http://www.pcbway.com/q I always buy pcbs from them. Buyers have coupons to save cost. The boards are pretty good with high quality. I also appreciate their delivery time. I think about making thousands
Electronics Forum | Mon Jan 04 23:02:20 EST 2016 | a290668789
It depends on the board complexity and the volume you needed. For standard PCB in prototype and small volume, suggest you http://www.pcbgogo.com/b. For complex board (e.g. HDI board), suggest you fastprint and Yuwei. All of them are in China. Hope i
Electronics Forum | Tue Dec 22 10:04:38 EST 2015 | bobulator
Yes, SJ Innotech makes long board printers. Lengths they have are 680mm (26.8"), 850mm (33.4"), 1000mm (39.3"), and 1300mm (51.1"). We sell them in North America, go to ApexFA.com for our website and contact info, or PM me.
Electronics Forum | Wed Feb 10 14:19:30 EST 2016 | davef
Here's what I know about CE marking: * It applies to equipment producers that market their product to be used by Eurolanders. * CE is not an end-user requirement. * Eurolanders define the equipment requirements. * Equipment producers self-certify com