Electronics Forum | Thu Mar 11 07:13:08 EST 2004 | cyber_wolf
Claude, We are building leading edge product on 95+ vintage machinery as we speak. About the only thing that we are unable to do is 0201's.(This can indeed be accomplished with upgrades to older equip.) I am not saying that the used equipment sales
Electronics Forum | Fri Mar 12 15:10:13 EST 2004 | dougt
I believe the Falcon vision board that Contact Systems used in their equipment is no longer being made by the manufacturer. I would first call them (most reputable), next check the used equipment guys (be carfull), and lastly ebay (good luck). What
Electronics Forum | Fri Mar 26 16:07:17 EST 2004 | heatherc
Aegis' product CircuitCAM does perform this function. They have partnerships with most machine manufacturers allowing them to create programs for just about any SMT, Thru-hole, AOI and other equipment. If you call them they'll do a demo on-line wit
Electronics Forum | Sun Mar 21 04:44:28 EST 2004 | Laxmanan
We are recieving BOM from our customers.Certain customer's BOM will not specify the complete details in the description Column (Like Package,tolerace, voltage limits etc).They will be specifying the MFR's PArt # only. Is there any common website avai
Electronics Forum | Mon Mar 29 07:21:51 EST 2004 | jdumont
We are also having the same problem here. I was told earlier that it could be a problem with the solder mask during the raw board manufacturing level but then I noticed that the problem was only surfacing on boards that went through the wave. As far
Electronics Forum | Thu Apr 01 09:10:55 EST 2004 | cyclopsn
We are currently using non clean paste and non clean flux in our manufacturing process. But recently our customer feedback that using a non clean process might cause flux blockage in via hole area and potentially might burn or explode the boards over
Electronics Forum | Wed Jul 27 11:36:41 EDT 2005 | Rob
Why? All major component manufacturers' reels come with barcodes already on them or if not they (& their distributors) are set up to issue them, requiring no additional work or cost to fit the process, but I don't know of anyone who ships with RFID
Electronics Forum | Wed Apr 14 07:59:54 EDT 2004 | arcandspark
Makes a lot of sense, thanks for the excellent input. The peak temp I am running fo our pb free (238C and approx. 90 seconds above 183 C)is the recommended profile from T.I and also the solder paste manufacture. Not sure exactly what the melting temp
Electronics Forum | Thu Apr 22 06:42:03 EDT 2004 | Chris Lampron
Adam, What is the pad finish on the flex circuit? Is this the only component that you are having problems with? (on this Flex)If this is the only problem area on the flex (assuming there is more than one component)then that would lead me towards the
Electronics Forum | Wed Apr 28 12:13:57 EDT 2004 | Jack
You can find the procedures for different package types in the IPC-7711 & 7721 manuals. These can be purchased from the IPC.[http://www.ipc.org/] You can also try Circuit Technology: http://www.circuittechctr.com/guides/guides.shtml These manuals and