Electronics Forum | Wed Oct 17 14:26:30 EDT 2012 | dman97
With that said, do you happen to have the calibration procedure for the MTU? I already have the X0 Y0 jig. Just need to know where exactly I am supposed to calibrate with regards to the actual trays.
Electronics Forum | Fri Jul 19 13:50:29 EDT 2013 | kdc45
Thanks for the link, however, I have this manual already and it only shows how to replace motors, belts and prox switches and to adjust for zero set. Appreciate your time and efforts. I did find that it is an OC alarm. Thanks again. Regards, kdc45
Electronics Forum | Fri Dec 21 10:16:23 EST 2018 | jdengler
When an older Fuji machine acts odd the first place to go is a reset start and reload proper, program, and status to see if that fixes it. Just make sure you have a good proper before you begin. Jerry
Electronics Forum | Fri Dec 21 10:33:03 EST 2018 | kdexter0928
Thank you, Jerry. I have done a Fuji wash and resent proper and status, still no luck. I'm going to go through my proper and ensure it is indeed good.
Electronics Forum | Wed Jan 02 10:31:40 EST 2019 | kdexter0928
Not a problem! I appreciate all the help! They all travel in the correct directions. Do you know which input card I should be looking at to check the range switches?
Electronics Forum | Mon Jan 07 09:12:25 EST 2019 | kdexter0928
If anyone else encounters this issue my solution was the TSA-200A board replacment.
Electronics Forum | Mon Jul 04 13:43:38 EDT 2022 | richardcargill
is it a specific part you're having the problem with, or does the fault manifest on a number of different ones ?
Electronics Forum | Mon Jul 04 13:56:23 EDT 2022 | madisreivik
Actually its one part. I had an idea to test some completely different, pre-defined component which has been placed on that machine before. Do You suspect there is a diabolical shape parameter somewhere ? :)
Electronics Forum | Tue Jul 05 16:58:00 EDT 2022 | jdengler
When these old Fuji's do weird things I usually try a reset start. Many times that fixes the issue. Make sure you have a valid proper file before you try it. Jerry
Electronics Forum | Tue Nov 10 12:06:59 EST 1998 | Steve Herring
Larry, We place QFP240's all the time with our 2 IP-3's. If you provide your e-mail or fax number, I can send you the PD that we use for our QFP's. Steve | Here is a good one for ya. Our IP3's MTU will not pick QFP240's out of cavities, 10, 12,
.png)
