Electronics Forum: mydata my12 y placement problems (Page 1 of 2)

my12 motor amplifier channel a error

Electronics Forum | Wed Jan 29 13:01:04 EST 2014 | tech1

Back when the Linear Y wagons first came out Mydata had problem with the original Y amplifier and were swapping out the complete box for customers who had problems. There was also a problem with the encoder that resulted in the same type of errors yo

my12 motor amplifier channel a error

Electronics Forum | Fri Jan 10 03:33:42 EST 2014 | hans88

hello people, we have a my12 wich has a problem it gives the following error during hardware initialization: F-MOT-MSETDYN Y/1236 :Motor amplifier channel a error. after this error it says hardware initialization failed. this prevents us of using

MYData placement variations

Electronics Forum | Fri Mar 02 15:01:32 EST 2007 | dyoungquist

We have a TP9 and are having no problems placing 0402s or fine pitch QFPs. Try slowing down the accelerations on the X and Y axis. That increases the time it takes to place a part but I have found that it can help accuracy. All the other posts hav

MYData placement variations

Electronics Forum | Wed Feb 21 06:11:41 EST 2007 | CL

Good Morning, We have 5 Mydata MY machines in separate lines. We are placing 0201's, uBGA's, CSP's, etc.... I cant say that we have never had accuracy problems but whatever caused the problems was identified and they are fairly accurate as far as I'

Samsung SM320 vs Mydata MY12E

Electronics Forum | Thu Mar 22 09:49:16 EDT 2007 | Manyhatz

You shouldn't have any problem with the SM320 doing what you're asking above. In fact I think it will do it quite better. We have a two machine TP-11 Hydra line and a two machine SM320 line and I can tell you one SM320 can get the job done better.

Mydata Lift motor 2 amplifier error

Electronics Forum | Thu Oct 15 10:21:30 EDT 2015 | azdback

troubleshooting a table lift error on MY12. Error code: F-MOT_Releaseboard conveyor lift/1304. Basically, the table got stuck on the up position. Also bench tested both lift motors and they are ok.Rotated the lift motors manually to test the encoder

F-MOT-MSETDYN Theta/12: No axis movement detected by transducer

Electronics Forum | Thu Feb 06 20:23:35 EST 2020 | bilalfarooqi

Hey everyone, We use a MyData MY12 machine and we are experiencing a problem with the Midas head. I recently replaced a torn vacuum tube that goes on the zfib card. The machine worked perfectly for a day and a half but now MY12 has completely stoppe

Mydata for prototyping?

Electronics Forum | Mon Jan 14 15:15:25 EST 2002 | burb1999

Currently our company is in the process of putting together a SMT prototype line... I have experience with fuji, universal, DEK, MPM, BTU, Electrovet in a high volume application. Now with prototype builds we have narrowed down a few and would like

Samsung Placement Machines

Electronics Forum | Mon Aug 04 11:19:10 EDT 2003 | Sat

Thanks for the useful feedback. I understand that there is a new Samsung distributor - Dynatech (seems to be very customer oriented - I guess partly because they are a privately held company!) and that they have taken over the existing facility of Sa

MY12 F-MOT-MSETDYN x/12: Position Counter Dead

Electronics Forum | Thu Sep 04 09:40:14 EDT 2014 | rgduval

I'm surprised MyData is pushing the service call. They're usually pretty good at walking you through some troubleshooting steps before going straight to the service call. So, the failure sounds like an encoder failure; the encoders are attached to

  1 2 Next

mydata my12 y placement problems searches for Companies, Equipment, Machines, Suppliers & Information

Void free Reflow Soldering

Training online, at your facility, or at one of our worldwide training centers"
Selective soldering solutions with Jade soldering machine

High Throughput Reflow Oven
Non-heated dispensing system

High Speed Precision In-Line SPI System - Mirtec MS-11
BGA and SMD Rework Stations

MSD storage in desiccant dry canbinets