Electronics Forum | Mon Jul 28 18:31:43 EDT 2003 | mantis
Hi There, First has the machine in question had the camera upgraded to accomdate 0603/0402. It sounds like there is a bad pickup on this part.Are all nozzles ok is feeder indexing correctly has part pick up position(Station 1) been calibrated. Hope t
Electronics Forum | Wed Jul 30 11:11:11 EDT 2003 | Roger
Has anyone changed the PD on this part lately. Sounds like a program (PD) issue. Nozzle size should be .7mm. Narrow view should be selected. Tape leaf cover on feeder should be .7mm. Make sure parts aren't on the camera lens. Good luck!
Electronics Forum | Wed Jul 30 00:05:05 EDT 2003 | praveen
Hi, I am observing warpage in the PBGA during reflow in rework machine.Reflow profile is std. (Peak temp is 214 deg C using 63/37 paste). Please advise what should be the gap between the nozzle and the BGA body during reflow process in SRT BGA rework
Electronics Forum | Wed Jan 21 10:35:14 EST 2004 | J Smithj
We have not checked the storage plate yet. I did send an email out to a couple of our other plants and discovered they too are seeing problems. The storage plate has come up in disscussions here. Since you mention it as well I think we should take a
Electronics Forum | Mon Feb 23 07:09:28 EST 2004 | Erv
We have been using the 3M Electronic Service Vacuum Cleaner for a couple of years. The buisness end (hose and nozzles) is ESD Safe, it's Easy to use, and filters are a snap to change. The case is not ESD Safe, but if you do not set it on or right nex
Electronics Forum | Tue May 11 12:23:40 EDT 2004 | Mark
Just wondering about feeders 8x2 with .7 nozzles and cover. Wondering if anyone that reads this has any extra feeders for sale or know of a house with some for sale? Got some 0402 coming my way and we only have 8x4 with 1.3 covers and 1.0 covers.
Electronics Forum | Tue May 11 17:50:41 EDT 2004 | longpham246
Just wondering about feeders 8x2 with .7 nozzles > and cover. Wondering if anyone that reads this > has any extra feeders for sale or know of a house > with some for sale? Got some 0402 coming my way > and we only have 8x4 with 1.3 covers and 1.0
Electronics Forum | Tue May 04 22:45:58 EDT 2004 | alwil
I want to find out if we can place 0201 components using a Fuji CP6-E 4000. If this is possible, do we require any upgrades to the machine. Is anyone doing this at present with this type of CP6. If so, what size of nozzle and feeder type is being use
Electronics Forum | Tue Jun 01 17:34:55 EDT 2004 | older/wiser
This is a real old machine. You won't have much luck with Weller. They sell a unit that they think is much more current. Nozzles are to come by, but are necessary for different size parts. Look on E-bay if you haven't. You also might find a deal on a
Electronics Forum | Wed Jun 23 17:24:05 EDT 2004 | kmakiya
Thanks for the response. I did think about boards being tossed about because of nozzle pressure and alignment but I suspect the root cause is handling (people not being careful when they put boards into and removing them from baskets). This is the re
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411