Electronics Forum | Wed Oct 25 11:33:44 EDT 2006 | bill
I have inherited a SonoFlux 9500 spray fluxer. It appears to have never been used and was build in 1999. It is missing the nozzle and a couple of other parts. Would it be worth it to get this thing up and running to replace a foam fluxer? Does an
Electronics Forum | Tue Oct 31 19:42:11 EST 2006 | dg
We have a Panasonic MV2V machine with orange reflectors. When the nozzle centre measurement is run, many of the nozzles have a blue NG for the large camera. We have tried adjusting the spotlight positions, cleaning and/or replacing reflectors, replac
Electronics Forum | Tue Jan 30 10:33:10 EST 2007 | SWAG
I'm not familiar with the mechanics of a Fuji but when we were learning to run our chipshooter, we did not correctly assign board thickness in the program. This caused the board support pins to warp the board up just enough to push nozzles to a par
Electronics Forum | Wed Apr 09 09:23:03 EDT 2008 | swag
Yes - I was hoping to get some dimensions for key locations in relation to nozzle center for machining mods. I got it - spindle key is 0.380" off center at 180 deg. in changer, head rotates spindle key to 270 deg. position when zeroed. Changer key
Electronics Forum | Tue May 20 14:25:06 EDT 2008 | cyber_wolf
We use SMT Research nozzles. They are excellent.As good as if not better than OEM...in my opinion. We have been looking at some other possible suppliers such as Metro. We have CP4's and CP6's Any insight much appreciated.
Electronics Forum | Tue May 20 14:50:06 EDT 2008 | mmjm_1099
I have dealt with SMT Research myself as well for many years. I would rather pay for quality of a product than just something that seems cheaper. Be on the look out for steel nozzles as they will become magnetized and cuase you many problems. So if y
Electronics Forum | Tue Dec 16 22:38:51 EST 2008 | ashley
Hello Sr.Tech, Please write direct to apexservice@apexsmt.com I am sure they are able & willing to provide to you sample nozzles for your evaluation. Just let them know the sizes that you need. Apex SMT in Singapore is also be able to support other
Electronics Forum | Fri Jun 06 13:00:40 EDT 2008 | gdzuber
Hello, The answer to your question depends on your using a point-to-point system, or nozzles. Some companies might use 3mm as the nozzle wall width. There are many approaches to selective soldering, depending on your desired cycle time. I can g
Electronics Forum | Tue Jul 29 03:10:18 EDT 2008 | tpradio
I have a problem with a I-pulse M1. Monday morning i came back from vecation, and started up the machines. warmed them up, and then..... When i started the program, (normaly it starts with scaning the nozzles) the head moves to the first nozzle, and
Electronics Forum | Mon Jul 13 13:48:37 EDT 2009 | christian01976
Hello! You can check your vacuum in MANUAL and then VACUUM IN MONITOR. You can switch the vacuum on or off for each head. With a TYPE 72 nozzle and no component the vacuum should be around 80 or 90 and with a component at the nozzle it should be ove
SCANSMT is local stocking dealer who major in SAMSUNG,PANASONIC,YAMAHA,JUKI,FUJI mounter and MIRTEC,KOHYOUNG,PARMI,PEMTRON,CYBEROPTICS AOI&SPI,MPM,SJ,ESE Printers.HELLER,TSM Reflows are always have invertonries.welcome to visit us
Training Provider / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Floor 1,D Building,B area,Dongsheng Techwin Park,Bao'an District
Shenzhen, 30 China
Phone: 008618566662725
winsouce.jpg)