Electronics Forum | Tue May 21 12:58:15 EDT 2013 | highmillr
We have 2-Samsung 431's followed by a 421 on our line..We run different revision boards with similar parts. Is there a way I can run one revision feeder set up.Then switch over to the next job without having to switch feeders around for the new progr
Electronics Forum | Thu Nov 07 15:06:11 EST 2013 | hegemon
1st X-Ray looks pretty good. One instance of what looks like solder migration in the lower left quadrant. 2nd X-Ray shows a number of locations where the solder has migrated into the vias, shown by the small dark circles between the main spheres.
Electronics Forum | Mon Jul 22 14:01:31 EDT 2013 | jax
HMP can mean a lot of things, although it is normally used as the generic name for one of the following alloys: Pb93.5 Ag1.5 Sn5 (296°C-301°C) Pb95 Sn5 (308°C-312°C) Pb97.5 Ag1.5 Sn1 (309°C) If you are talking abou
Electronics Forum | Wed Aug 14 13:24:18 EDT 2013 | eadthem
We just designate shelves with signs, PULL HERE, Move UP NEXT, MOVE UP 2nd, MOVE UP 3rd, We also keep paste in the incoming case, if it has one until its time to open it. Our operators are the ones who stock it and as long as they know they own
Electronics Forum | Fri Jan 31 11:45:52 EST 2014 | emeto
Hi, to get better image you will probably need higher voltage(depending on how close you want to look). The closer you get the higher the voltage should be. Here are some tips for machine calibration: 1. Make sure your board is on focus. I don't kn
Electronics Forum | Fri Feb 21 11:25:06 EST 2014 | rgduval
Thanks, I've been glancing at Universals, too. Knowing that they do factory refurbs is a factor. We're considering all avenues at this point. The owner likes not having debt in the company, so, cash purchases are of interest...which does lead us t
Electronics Forum | Fri Jun 05 04:07:15 EDT 2015 | buckcho
There are several way to tech this. I used this machines some time ago and maybe I am rusty, but you can try two ways that I can think of: -use IC package with 4 leads from one side and 1 big from the other. You can play here a lot, for example you c
Electronics Forum | Thu Mar 20 15:57:57 EDT 2014 | edwaterfall01
The numeric display number should be higher but only when all 7 spindles are moved down slightly from the full up position. The 7 spindles retract up to the Stop Bar. Each spindle assembly has a tapered hole thru it. This hole is in the block with t
Electronics Forum | Wed Apr 02 15:29:26 EDT 2014 | emeto
Hello, as we are talking about X-ray, I don't think you can do maintenance on your own unless you are specially trained in X-ray applications. Dage(we have Dage) offers maintenance as well as tube warranty but it not cheap. In terms of programming y
Electronics Forum | Thu Apr 17 11:59:59 EDT 2014 | briantmc
Hi all. A "newbie" on the forum, hopefully someone can help! I have a Quad IVc that has developed a problem on its Theta Axis. In performing the Homing routine it does not spin the nozzle through 360 deg as it should. It does a small turn ~45deg o