Electronics Forum | Thu Sep 02 11:17:39 EDT 1999 | AF Ng
Could someone shares their experience on the causes of 'Open' in the BGA after reflow.
Electronics Forum | Thu Aug 05 16:07:51 EDT 2004 | davef
Did you record the thermal recipe on the ball that your customer complained as open or some other ball?
Electronics Forum | Thu Sep 02 12:08:22 EDT 1999 | Doug Philbrick
| Could someone shares their experience on the causes of 'Open' in the BGA after reflow. | | Reflow prifle is also critical, as usual. On large boards board support is also a factor. If the board warps at the BGA you can experience opens. Good Luck
Electronics Forum | Tue Oct 03 09:23:55 EDT 2006 | kenscj
We are encountering BGA solder open connection. At Functional Test, the board failed. Debug guy diagnosed this BGA open connection (2 locations), by using multimeter. Under 5DX inspection, there is connection. Take the board for localised reflow at
Electronics Forum | Fri Sep 03 14:20:38 EDT 1999 | David
| Could someone shares their experience on the causes of 'Open' in the BGA after reflow. | | You must have been in the same meeting I was in earlier today. We are currently having some opens on BGAs. The problem joints are all on the perimeter of
Electronics Forum | Tue Sep 07 12:45:47 EDT 1999 | Brad Kendall
| Could someone shares their experience on the causes of 'Open' in the BGA after reflow. | | Are you having a problem with the joint openning up after reflow. Like it was soldered after the reflow process, but at final test is not? I had this pr
Electronics Forum | Thu Sep 02 11:50:58 EDT 1999 | ScottM
| Could someone shares their experience on the causes of 'Open' in the BGA after reflow. | | Insufficient solderpaste. "No flux" (sat too long after print). Those are what I've experienced. Cheers, Scott
Electronics Forum | Mon Mar 10 02:54:22 EST 2003 | sankar
Dear All, Can you advice on how to use X-Ray system to identify the QFP/PLCC pin open application. Whether at all X-Ray can be used for the above application. If so, what will be the false rejection of the X-Ray system. Regards Sankara narayanan ME
Electronics Forum | Tue Aug 08 06:13:44 EDT 2006 | spari77
hi, can anyone share experience on PCB open trace repair? we have some data that indicates that this repair is high risk and really very dependant on repairer skills. It may also cause reliability issue for trace repair. please advice.
Electronics Forum | Wed May 16 00:14:45 EDT 2018 | leeg
We have a Dek Horizon and we have started getting a data file open error when trying to save files. This is resulting in us having to re-teach board fiducials etc in every time we switch back to a previous job. Any ideas?
