Electronics Forum | Wed Feb 15 06:29:05 EST 2006 | Chunks
Send it out to someone who can make sure. Gerber readers are hard to make changes with, which is their design. Send it out. Most places will charge @ $100 US.
Electronics Forum | Sun Mar 12 18:20:08 EST 2006 | jldowsey
Thanks Russ. As it turned out, it was an incomplete cure at the fab house. Rhey sent another fab over from the same lot that had sat for 3 more days, and it came out lavender instead of purple! have a good one!
Electronics Forum | Mon Mar 20 11:08:17 EST 2006 | Chunks
Spare parts? Like what? If it's your belt motor, try cleaning out the gear box attached to it. 99% of the time it's the lube in this gear box that dries out and turns to glue.
Electronics Forum | Thu Mar 30 21:54:36 EST 2006 | mrduckmann2000
Alex, We will be using acrylics only. We are looking for a machine that will allow us to have 20 to 30 keep out areas per PCB. How's your machine at keep out areas? Thank you for any input.
Electronics Forum | Thu May 18 15:18:14 EDT 2006 | Chunks
Can you send it out for repair. Best Electronics has helped us out in the past. I know they used to advertise here (see Earl?) in the past and can do some pretty cool stuff.
Electronics Forum | Thu May 25 10:58:38 EDT 2006 | barryg
Does anyone out there have much experiance with the testronics bench aoi system? We apperently cannot get a demo and are considering the testronics and a mirtec system. Any other systems out there that are in the 25-60k range you would recommend?
Electronics Forum | Mon Jun 12 10:20:19 EDT 2006 | patrickbruneel
18 days to go Are they finally figuring out what many veterans knew since the very beginning?? Check out this article: http://www.telegraph.co.uk/news/main.jhtml?xml=/news/2006/06/11/nbook11.xml# Patrick
Electronics Forum | Fri Jun 30 17:38:17 EDT 2006 | grantp
Hi, Thanks guys and that's a big help, as I thought we had to have the lot flushed out, and I guess I must have transferred my worries about us flushing out all parts to our sales channel as well! Regards, Grant
Electronics Forum | Fri Jul 21 09:41:32 EDT 2006 | cyber_wolf
If its just the X axis then I would say that there is most likely something wrong with the ball screw. Does it only do it when the axis is moving fast ? Take the support plates out and check for anything out of the ordinary under there.
Electronics Forum | Wed Oct 04 03:48:14 EDT 2006 | slaine
Ps the above answer was to test if the element is failing, if you think the element is not working due to the current supply being limited you can carry out the same calculations but work out the current required then put an ammeter in series with th
