Electronics Forum | Mon Jun 27 15:02:55 EDT 2005 | cmiller
Thanks for the reply. I had the instructions out of the manual but after re-programming we had all kinds of wierd stuff going on. After re-setting the PC several times it worked fine. Can I get a copy of the instructions you have? It would be appreci
Electronics Forum | Tue Jun 14 11:25:19 EDT 2005 | pr
Sounds a little tough to achieve. Math isn't my strongsuit but...If you run a million parts through the machine, you will have 200 feeder exhaust's (assuming 5000 per reel). So if you have your machine error out after 3 attempts/misspicks you will ha
Electronics Forum | Thu Jun 16 08:31:15 EDT 2005 | jh0n!
The most part I have the most difficulty with is a 16mil QFN. We found that reducing stencil thickness to 4mil, and reducing aperatures for the IC by 20%, and setting local fiducials to the IC helped immensely. We used to get 75% or more bridged ou
Electronics Forum | Thu Jun 23 10:49:46 EDT 2005 | slthomas
Your HVAC contractor is probably the guy to talk to (they can hook you up with a variety of air handling and filtration systems depending on the level of cleanliness you want). Another thing you can do is reduce the amount of dust you bring in and/
Electronics Forum | Fri Jul 15 13:58:32 EDT 2005 | seaK
Our production is putting QFN40 and QFN56 package on board. With 80% opening on terminal, 40% on thermal pad, we found QFN56 100% forming toe fillet, but it does not work out the same to QFN40. We suspect it's because of the weight of component.....
Electronics Forum | Fri Jun 24 12:03:58 EDT 2005 | ehess
I am looking for some info on our Kenco Industries, Ionic Tester. I've searched the internet, but cannot find them. Tag says Atlanta, GA, but search brings up nothing. Does anyone out there have one of these, and do you know where I can get parts?
Electronics Forum | Tue Jun 28 19:56:20 EDT 2005 | matjen
I am in the process of searching for anyone that does repair on fuji cp6 nozzles .7 & 1.0 mainly, We have an abundance of bent and broken nozzles that I would like to get repaired rather than throwing out so if anyone has information on this please
Electronics Forum | Fri Jul 08 10:38:15 EDT 2005 | patrickbruneel
Hi Inds, Don�t forget to give us an update in about 3 months so we can all learn something from real life experience. Common sense tells me that the alloy will be out of balance in 3 to 6 months (depending on volume and board/comp.plating) but I can
Electronics Forum | Mon Jul 25 06:12:53 EDT 2005 | lloyd
Folks thanks for all the info, I'm gonna check out our pad geometries and see how they compare with industry standards. Brian, could you elaborate a bit more on the stencil design you have mentioned. Do you mean that you have offset the stencil aper
Electronics Forum | Tue Jul 12 04:31:41 EDT 2005 | Chris Ong
Sorry, I missed out a few point. Is Asahi solder really that popular, even my friends told me that although pricing is higher but able to achieve excellent result. If you have any paste recommendation for my 0402 and 0201 component. Frankly speak
.gif)
