Electronics Forum | Mon May 16 10:43:22 EDT 2005 | wizy
I would like to ask, if somebody know, what I have to do with "L3 TIME UP" error message in MPA-V, or where can I switch off the coplanarity unit?
Electronics Forum | Mon Jun 12 22:35:57 EDT 2000 | Suan
Is there any tablets to reducce Dross Produced by the chemical reaction of the solder pot.If there is ,please recommend and to what extent is the % reduction do we expected to see. thank you Panas
Electronics Forum | Wed Sep 06 06:04:16 EDT 2000 | Dreamsniper
Hi Guys, I'd like to collect info regarding YAMAHA YV88 Mark2 and YV100 series. Are they of any good compare to Universal GSM1 or Panasert MPAV2 ? My new company's products have hips of fine pitch components (0.5mm) and we are planning to get new eq
Electronics Forum | Fri Mar 18 19:36:14 EST 2005 | Andrey
We have two proposals for purchase about multifunction machine. First � MPAV2B Panasert with full parts - vintage 2000 Second � QP-242E Fuji (4 Units) with Index BI-607x3 and single BS-607x1 modules � Vintage 1999. Please tell anyone if possible. Wh
Electronics Forum | Mon May 16 11:10:26 EDT 2005 | wizy
I look also for new job in SMT area. Machines what i know: MPM APHie paste printer Simens lines (S23, F5, HS60 etc.) Panasert lines (MV II F, MPA-V, MPA G1, HDP) Omniflow reflow soldering Macrotron and Baasel laser engraver PDT3000 PROM programer
Electronics Forum | Fri Apr 16 01:19:10 EDT 1999 | Wiratsr
Hi Jeff, I didn't have experience with Pansert MV2-E, but I have MV2-F. The machine running in high speed, but very noisy. I have other machine Sanyo TCM-3000 Same speed with MV2-F. Sanyo is original design turret system, a stable mounting machine,
Electronics Forum | Sat Mar 03 21:00:36 EST 2001 | edmond
Panasert machine is known for programming ease. Both machines having U-axis indexing unit which may crash due to operator mishandling. Comparing the reliability and accuracy, the MPAV is more stable to MPA3F. MPAV using full vision for part regconiti
Electronics Forum | Thu Mar 22 17:03:59 EST 2001 | williamh
I have been using an MPAV and MVIIF for about 3 1/2 years and have had some difficulties, mainly with the MPAV. After only 2 1/2 years of use we had to replace the laser because we were having alot of QFP's being mismounted. That was an $8,000 expe
Electronics Forum | Sun Feb 15 17:12:15 EST 2004 | brian bennett
as george says move beam back towards the centre of the machine make sure it is square although not neccesarily on the alignment arrows. make sure alignment laser is clean along with the recieving mirror on the head.also make sure the driver filters
| 1 |
