Electronics Forum | Mon Apr 25 20:54:25 EDT 2011 | veeckm
Hello, First of all I am new to the forum and surface mount machinery in general. The machine in question has a problem picking parts correcly. The main problem seems to be that the camera and actual head location is out of calibration? If I do a ru
Electronics Forum | Thu May 26 11:21:14 EDT 2011 | asksmt
Hello Guru's, I am using IPC-7351 LP Calulator to design Footprint (0603, 0805, 1206, SOT-23, etc) for all SMT Parts. Our Production Recently commented that they have included Red Glue Machine inhouse and will use Wave Soldering for Both Thru-hol
Electronics Forum | Tue Jun 07 21:27:19 EDT 2011 | aoiguy
We're in the process of doing the same. We've gone through a large amount of presentations from at least 5 different machine manufacturers. MVP is one of the machines on the top of our list. Their GUI is very friendly, programming time was low compar
Electronics Forum | Tue Jun 07 20:56:47 EDT 2011 | aoiguy
Any and all input will be greatly appreciated. So here it goes. I'm having an issue where the cad I'm getting from customers is referencing pin 1 as the parts placement. This isn't an issue for surface mount, however the aoi machine that we have in
Electronics Forum | Thu Aug 04 22:02:25 EDT 2011 | fujiphil
IP3 camera calibration, you need the following: 1. Part camera resolution Jig. 2. 10mm nozzle for nozzle centering. 3. Button jig (skip). 4. Glass board and Glass parts. 1. Conduct the Camera resolution. Set the following Delta values: X=+/-0.1mm;
Electronics Forum | Fri Mar 02 10:20:24 EST 2012 | caerleon
Yes i am trying to install controls. The MSL classification for a part is defined in JSTD033B which i have. I need to update all 5000 plus parts on my MRP system with the correct MSL level (we will be audited on it by BSI). I know that manufacturers
Electronics Forum | Wed Feb 15 10:37:19 EST 2012 | caerleon
The only way you will be able to measure it is to count the reel before you put it on the machine, count them when they come off and deduct the amount expected to be placed. you will then have the result of attrition on the machine. or.. Pick the p
Electronics Forum | Thu Feb 16 12:16:57 EST 2012 | swarnergictg
No-one should be accepting parts based solely on the presence of a C of C - from an independent or even an authorized distributor. You should have a QC plan in place that includes comprehensive visual inspection, microscope, x-ray, XRF, decapsulation
Electronics Forum | Mon Mar 05 13:35:04 EST 2012 | acsscott
Figured out that you have to press Ctrl & Enter to get this screen to come up. Also, to remove the LCS, you need to remove the "Y" cable to the left of the control box in the bottom of the Topaz X. All works well now, but still can't get it to load
Electronics Forum | Sun Mar 04 09:53:00 EST 2012 | eadthem
What i have on the original 2 problem boards is the parts next to it are SOIC8 and placed using a 125F(.125" dia) 1 of witch is close and we have to Z zone it to place the SOIC last, the others have more than .02" clearance on all sides. The other
