Electronics Forum | Tue Oct 26 17:25:11 EDT 2004 | davef
In every part of the dive, assume the proper position, keep toes pointed always, relax hands but keep pointed, stretch arms, make sure legs are together during takeoff and the dive, hands have to touch the top of the toes in a pike position, moving t
Electronics Forum | Wed Nov 03 19:29:18 EST 2004 | hyabro
One of my customer had an oven made of galvanized metal. when he rised the temperature for lead free application the zinc from the alloy(blower turbine and housing,...) was melted and was removed .I offered to my customer an used oven tornado made by
Electronics Forum | Sat Nov 06 06:22:53 EST 2004 | GS
Many Thanks Davef for your continuos great tech support. From my side, I am still fighting against BIC coming with sockets ( still tons of Br-). Even the supllier is surprised about this pbm. But as we know no Standards available to control bulk ion
Electronics Forum | Tue Nov 09 16:12:17 EST 2004 | davef
Thermally conductive epoxies are rarely used to hold components in-place. They are more likely used as fillers between two surfaces. Yes, single part glues without an activator are available that are suitable for screen printing or dispensing. Som
Electronics Forum | Mon Nov 15 20:56:20 EST 2004 | davef
In the most straight foreward terms, low residue fluxes are: * Less expensive than other flux types from an equipment purchase stand-point. [Obviously, this is a benefit to only those either without equipment or readily able to dispose of the equipm
Electronics Forum | Mon Nov 29 16:04:47 EST 2004 | Terrapin Station
They are actually diamond impregnated tips. The tip can be cleaned using a special jig. this will extend the life. these nozzles are from a machine platform dating back to 1997. The RSS can last for 1,000,000 cycles. SA and MA are similiar but requi
Electronics Forum | Mon Aug 22 08:09:51 EDT 2005 | cyber_wolf
The only time I have seen any Fuji IP need calibration is if you have had a serious crash, or if an axis or camera has been removed. Make sure you don't have something else going on. For instance check these things: 1.Check nozzle vacuum 2.Make sur
Electronics Forum | Mon Mar 13 05:29:08 EST 2006 | hitechsc
Hi just to clear a few things, We produce the nozzles and the parts are manufactured in two stages, CIM and plastic injection moulded, we designed the rear end of the ceramic tip with spikes so when the secondary operation on plastic over mould the p
Electronics Forum | Thu Dec 09 04:21:22 EST 2004 | chad
I have worked w/ the GSI SVS 8200's. They seem to do a pretty decent job, but, they are a "bottleneck" on my lines. I hope you are using good screen printers, because they WILL find the slightest "defect". About 75% of our failures are actually fa
Electronics Forum | Wed Dec 15 20:17:48 EST 2004 | cmiller
We have switched from IIT pro-plates to QTS stencils. lots of companies provide them. We still buy from IIT, they have been one of the best suppliers we have had. The single axes tightening just does not get it anymore with the super small parts we h
