Electronics Forum | Thu Feb 24 23:01:30 EST 2005 | smtuser1234
One other thing to check is your PEC camera. Universal uses a jig to calibrate this camera but you could check it using this method. 1.Run about ten 0402 parts on tape with the PEC camera off and check placement. If the placement is off change the x\
Electronics Forum | Sat Feb 19 16:55:41 EST 2000 | cedric conjat
trying to identify faulty component seems to be a zener need to find the parameters PEC 5KE36CA do you know a database which could give the figures do you know the manufacturer (PEC)
Electronics Forum | Sat Feb 19 16:55:41 EST 2000 | cedric conjat
trying to identify faulty component seems to be a zener need to find the parameters PEC 5KE36CA do you know a database which could give the figures do you know the manufacturer (PEC)
Electronics Forum | Thu Sep 02 11:44:37 EDT 2010 | swag
No, red light should be what you see from a PEC.
Electronics Forum | Tue Mar 08 11:23:45 EST 2016 | ttheis
Yes, that was the issue. Parts are on the pads now. Thanks!
Electronics Forum | Wed Sep 07 15:21:15 EDT 2005 | PWH
You are having problems with the PEC (fid. recognition, etc.) camera, correct? Not that camera(s) on the base machine (2.6 mil, 4.0 mil, etc.). If it is the PEC camera you are talking about I don't know much but if it's one of the other cameras I m
Electronics Forum | Tue Jul 19 14:03:03 EDT 2022 | ttheis
Reading up I see there is a fixture (part# 1212100) but I am not able to find any information on this. Has anyone ever adjusted the focus of the PEC camera? Anyone know what this fixture looks like? One of our machines is out of focus but still able
Electronics Forum | Mon Feb 28 21:13:53 EST 2000 | Pat Copeland
Type in the part number at digikey.com parts search. Leave out the PEC and you will find three parts. One will direct you to the General Semiconductor site. This should help
Electronics Forum | Mon Feb 28 21:13:53 EST 2000 | Pat Copeland
Type in the part number at digikey.com parts search. Leave out the PEC and you will find three parts. One will direct you to the General Semiconductor site. This should help
Electronics Forum | Thu Sep 08 03:45:22 EDT 2005 | geb
Yes, unfortunately it is the PEC camera which checks Fids and is used for Feeder Teach. I have found that you do need a service check before you can register with UIC. Do you have access to their database still? Thank you