Electronics Forum | Tue Jun 07 19:05:52 EDT 2022 | duchoang
First Article Inspection is always a MUST in SMT Process. If possible AOI would be added. We also have second operator/inspector to check on pick&place machine setup and use a program printout for inspector to compare/double-check with BOM and the ot
Electronics Forum | Fri Sep 07 18:08:07 EDT 2001 | ksfacinelli
We are building complex computer boards that have a few odd form parts that we would like to place while still while on an inline section of conveyor. Using tweezers to place the parts is possible but very awkward. Has anyone seen a creative way to
Electronics Forum | Mon Sep 19 19:22:11 EDT 2011 | henrytcx89
Thanks for taking ur time to answer this. =) The pick and place machine is just pick from wafer(on tape) and place into waffle pack. I read from some of the sources saying that the ejecting needle and the vacuum pick up bits could cause the die to c
Electronics Forum | Mon Aug 01 18:33:21 EDT 2005 | crishan
Hi All, We are not using a Vib. bowl feeder, or stick feeder, these parts are on a reel. The pick & place machine we are using is a Panasonic brand YV100X, its a single head with 8 nozzles. What we are finding is that the component package size is
Electronics Forum | Tue May 05 08:32:34 EDT 2020 | travishemen
Check for nozzles that are stuck up. They may be able to pick the part but will drop the part during placement. I have also seen a feeder several positions over from the part not being picked/placed have a piece of carrier tape sticking up and not
Electronics Forum | Thu Nov 24 20:42:32 EST 2005 | adlsmt
I agree with Grant, I posted a reply to your other thread as well so wont go into detail on machines but if quality matters, go with a tier one supplier. Even Fuji is dropping thier prices. We picked Universal, I cant believe the difference in pick r
Electronics Forum | Wed Sep 01 18:26:10 EDT 1999 | Lauren Cielo
Certain ICs cannot be place by our pick and place machines and therefore operators place them by hand. Has anyone seen some type of dispensing material handler that would ensure we don't bend the leads of this fragile devices? I'm envisioning some so
Electronics Forum | Thu Jun 23 20:09:03 EDT 2005 | Stefan
Optimizers for pick and place machines are very specific for the type and model of the machine you are using. A chip-shooter will run at optimal speed with the same type of nozzle and minimal table movement. Most X-Y tables have a faster X-axis than
Electronics Forum | Fri May 10 05:57:26 EDT 2019 | vinitverma
As long as it is in tape, go ahead and place it. You won't have any problems. I've place TSOPs and QFPs with Sapphire.
Electronics Forum | Mon Jan 09 07:01:47 EST 2006 | ron
I was wondering if anyone was using this machine to place 0402's and what type of 1st pass yield you were getting. I'm a little leary about the mechanical centering on such small parts. How is the feeder pick up position after it is taught? I have h
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Equipment Dealer / Broker / Auctions
13227 Royal George Avenue
Odessa, FL USA
Phone: 813-992-2437
