Electronics Forum | Thu May 09 12:29:59 EDT 2002 | dougt
So after barcoding takes place, is this info sent to the feeder or the outside world (is the feeder just a number that the pick and place machine looks for or does the feeder tell the machine what it has)? I guess if every machine and remote feeder f
Electronics Forum | Sat Jun 08 07:06:21 EDT 2002 | cyber_wolf
At each of the machines we have a log book.One of the sections that the operators fill out in the log is called machine downtime, and next to it is a comment section.Any time the machine is not placing parts they make a quick note of why they are dow
Electronics Forum | caldon |
Tue Jun 17 11:22:04 EDT 2003
Electronics Forum | Fri Nov 18 10:05:28 EST 2005 | lgroves
most pick and place machines will run for a very long time provided the operators keep them clean and well lubricated (10 years +). Often we end up replacing equipment not due to inoperability as much as due to capability. as packages and use chang
Electronics Forum | Tue Apr 18 04:54:30 EDT 2006 | bayanbaru
We are using Siemens pick and place machine for chip placement. Our goal is to continuous production during component replenishment. In Siemens machine, the feeders that can be removed, reloaded, and placed back on the machine while the machine is ru
Electronics Forum | Fri Aug 08 13:31:37 EDT 2008 | RobP
We have a customer that wants us to quote a project placing 12x12 mil dies in large volumes. I can not find feeders for my pick-and-place equipment that will handle wafers with dies that small. Thus, I'm now looking to go to a die sorter to put the
Electronics Forum | Fri Oct 10 17:27:10 EDT 2008 | wagoner
We have several similar parts in our factory and they usually don't give me any problem. One part has a 0.050 pin that goes into a 0.055 hole, and we place it with Panasonic MSR turret style chip shooter, which has a placement accuracy of only +/- 0
Electronics Forum | Mon Jan 26 10:15:51 EST 2009 | john123
Can anyone help me determine the acceptability level for lead deformation (see attachment). The outer two leads on the left side were bent during the pick and place centering operation. I've looked in the IPC-A-610 book and could only find informa
Electronics Forum | Sat Mar 05 15:29:53 EST 2011 | surftech
Hello all, I've got three contact systems pick and place machines. I'm looking to purchase a new placement machine to replace and I'm interested in hearing your experience or advice on this. Here's what I'm looking for: Budget is 75-100K CPH needs
Electronics Forum | Mon May 21 09:00:19 EDT 2012 | mosborne1
Try switching to a polymer nozzle. Your machine manufacturer may sell them on any machine shop can mill you one. Also check to see if your pick and place had a puff off function. Some older machines have a mechanical adjustment on the mac valve used
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Equipment Dealer / Broker / Auctions
13227 Royal George Avenue
Odessa, FL USA
Phone: 813-992-2437