Electronics Forum | Fri Mar 17 14:32:54 EDT 2023 | smtauto
SMTnet community! I've been scratching my head on how to resolve the software bug on my MC388 4-head placing machine to no avail. Bug was traced to SMT software reading incorrect analog inputs on the MFX motion controller as follows: When mea
Electronics Forum | Mon Nov 10 14:26:16 EST 2008 | slthomas
It'll just transfer the load to your compressor, and who knows how efficient your venturi pump (which can also be noisy) will be (IOW, how much load it puts on your compressor is anyone's guess)? I'd just replace or rebuild the vacuum pump, person
Electronics Forum | Mon Nov 10 13:27:07 EST 2008 | evtimov
Hi janz, you should be aware of everything. You are going to change subsystem on your machine. How much vacuum you need on the machine? Can you control the vacuum level with your system? Can you control the the system at all? Is it really much more
Electronics Forum | Tue Feb 15 00:27:39 EST 2011 | jeffr
First clean and de-bur the hole in the nozzle, then try it again. If the Head does not pick up at the feeder, then moves to the dump position...it means that the Vacuum Sensor Board has detected that the nozzle vacuum is above the LOW threshold setti
Electronics Forum | Wed Oct 30 09:43:01 EST 2002 | gregp
Larger tighter spaced balls will present a problem in sealing the vacuum cup. There will be more leakage in this case. It really depends upon the application. The BGA you mention should not be a major concern. The bigger problems are with bigger
Electronics Forum | Mon Oct 28 09:48:10 EST 2002 | gregp
If I understand correctly you want to pick BGAs from the ball side using some type of vacuum arrangement. You will find that the reliability of this is dependant on the size of the balls and the pitch. The larger the balls and tighter the pitch, th
Electronics Forum | Mon Apr 09 13:16:57 EDT 2018 | harlymh
Would you recommend a Yamaha Pick and place? In terms of reliability, accuracy, cph? We're looking for a pick and place that can deliver a 50 micron accuracy. What brands do you recommend for high accuracy placements?
Electronics Forum | Thu Nov 06 11:12:57 EST 2008 | janz
Hello, One of our pick and place machine uses rietschel vaccum pump. It is making lot of noise. I am in searching alternative solution which could be venturi pumps. Does anyone has experince in changing vaccum pump to venturi system.? What should
Electronics Forum | Mon Jan 31 12:15:32 EST 2000 | Neil
I am looking for a Mydata users group, one possibly located in the Chicago area. If such a group does not exist, I would be more than happy to help start one. I have an older Mydata TP9 (non-UNIX) machine, with weak (yet expensive) support from the m
Electronics Forum | Tue Apr 10 02:57:53 EDT 2018 | rob
Yes I would, most of our old Yamaha machines (before 2005) will do 30-35 microns @ 3 sigma with the fine camera option. Our Jukis with His res camera's will hit it too. You should be OK with most things after 1997 with the right camera choice (whic
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA United Arab Emirates
Phone: 978 790-2774
