Electronics Forum | Tue Jul 08 16:00:04 EDT 2014 | comatose
The boards are expensive because they are your product... covered in circuitry. A 2% scrap rate costs twice as much as a 1% scrap rate. Say the parts on your consumer electronics board cost $5. A machine that makes 99% good boards and 1% bad boards
Electronics Forum | Fri Aug 01 18:50:02 EDT 2014 | hegemon
There are no BGA rework stations in that price range that I would consider for purchase. (or did you miss a zero in your cost estimate?) In order to have placement, and sufficient heating for proper BGA rework (top and bottomside)you're going to hav
Electronics Forum | Thu Jun 11 05:36:28 EDT 2015 | jlawson
Valor MSS NPI is far more powerful than all the lower cost solutions, I had customer assess all their lower cost solutions and found no real added value, if want more than just SMT programming. NPI needs Stencil Optimisation , DFM analysis, DFT engi
Electronics Forum | Tue Jul 21 14:33:43 EDT 2015 | tsvetan
Setting aside the shameless advertisement :) Can you define what is high speed? The real high speed P&P machines are done by Sony, Juki, Samsung, Siemens, Fuji. The Chinese p&p machines I saw are with low speed (less 30 000 cph by ISO) poor design,
Electronics Forum | Wed Aug 02 01:09:33 EDT 2017 | heros_electronics
Hi anyone have recommended pcb manufacturer? My > require: quick delivery time; best > quality; affordable price; best service; PCB > Assembly provided recommend http://www.heros-electronics.com, which is a one-stop pcb and assembly manufacturer
Electronics Forum | Wed Apr 06 08:54:35 EDT 2016 | spoiltforchoice
Essemtec like to keep some details to themselves to make you initiate contact but the Jet nozzle page states it can do 0.4mm dots. Last I checked a single Jet dispenser was about £15k GBP, the Scorpion machine itself is effectively the same platform
Electronics Forum | Fri Apr 28 10:12:55 EDT 2017 | clampron
Hello M, I have been a Mirtec user for quite few years (not dating myself). I had started with the MV-2 system and sequentially upgraded to the MV-3 and now the MV-6 Omni. We had tremendous luck with the MV-3 from a programming and defect detection
Electronics Forum | Tue Jul 18 11:16:33 EDT 2017 | svfeingold
Found it, it appears to be 15mm. I received a reply from K&S (Kulicke & Soffa) who support the Assembleon machines. They say they do offer full support and training. The support offer is $7,500 per machine for the first year, including: * Annual a
Electronics Forum | Tue Jul 25 14:18:21 EDT 2017 | emeto
John, programming can be done easier, but you have to pay the price somewhere. I would recommend using the following sequence if you see a lot of new products all the time. 1. Use your own part number system. With these numbers you will fill up you
Electronics Forum | Wed Dec 13 01:14:02 EST 2017 | tsvetan
"Pros: -You can fit more feeders on your machines. -One dual lane feeder is cheaper than two single lane feeders" none of these is true for Sony SI-G200 machines we have dual lane feeders are bigger than the standard 8 mm feeders so no space savin
