Electronics Forum | Thu Jun 21 01:02:21 EDT 2018 | sophyluo1985
Hi Sir, I think pneumatic is cost effective. but you will find there are so many problem with it in the problem if the condition of the feeder is not very good. So, once you decide to buy the pneumatic feeder, you'd better buy them from you local mar
Electronics Forum | Tue Jul 02 12:16:09 EDT 2019 | dman97
Yes we had the same problems with Flexa and our AIMEX 3. Fuji techs came in and upgraded all our software to version 6.24.0.1. This solved almost all the communication problems between server and client computers.
Electronics Forum | Fri Apr 27 12:41:41 EDT 2018 | irc
Thanks for the answer, but the problem is the blue button is tur on all the time and I need turn of for work whit the oven. Best Regards.
Electronics Forum | Wed Jul 04 03:59:10 EDT 2018 | oxygensmd
I had similar problem before. I cleaned the PCs (both machine and station) and replaced the cooling paste on the CPU cooler. After time the Control was able to shut off - before the issue solved, we used the safety knob to cut the Control.
Electronics Forum | Wed Jul 04 04:04:19 EDT 2018 | oxygensmd
One more thing. We had a card defect during the control had this problem, on of TBF card burned out. But I think you need to check the thermal paste in the PC - clean the cooler and the filter first.
Electronics Forum | Mon Sep 03 10:57:28 EDT 2018 | robl
Hi Oriol, Sounds more like a power supply/low voltage problem if all the driver cards are failing. Can you check if the PSU supplying them is stable? Rob.
Electronics Forum | Fri Sep 21 16:04:48 EDT 2018 | gpascolla
We have an old juki 740 which was purchased off of eBay at this time I am having placement problems with accuracy. I have taught to the board with the camera numerous times but I still have placement problems where the chip will be off the pad by alm
Electronics Forum | Thu Oct 25 01:13:55 EDT 2018 | mk15
thank you for your advice, the problem was in the elmo source 350V, there was a problem of dropping voltage when the engine accelerated.
Electronics Forum | Wed Jan 23 06:12:36 EST 2019 | tirthkar8980
Dear Team, Need help, we are trying to make urea core solder wire but the problem is some time core remains partially empty no urea filling in solder wire. please help me how to solve this problem. thank you, Tirthkar
Electronics Forum | Thu Jun 06 05:29:09 EDT 2019 | heinar
Hallo...Quad have problem with z, going to wrong. Parst to high and can not measuring. No errors. Have some body this problem and solutions? Thank you.
