Electronics Forum | Fri Apr 25 08:09:13 EDT 2003 | razor
Thanks for response. I do wish to qualify that I got the alleged role of Nickel use for corrosion resistance from an article authored by Jason Gjesvold, IS IT REALLY BLACK PAD?, "Phosphorus rich Ni alloys are often used for corrosion resistance duri
Electronics Forum | Fri May 23 16:05:34 EDT 2003 | Kris
Hi, I think using a epoxy glue will be a more approriate process for a IR oven than kapton tapes or high temp solder Comments ?
Electronics Forum | Thu May 15 11:50:19 EDT 2003 | mantis
we have seen something similar,at the edge,sof the Bga the tracks were shorted with some burr and excess gold. It was very hard to find but it was root caused back to the BGA manufacturing process.
Electronics Forum | Thu May 22 09:59:54 EDT 2003 | russ
You also would want to talk with your flux supplier. They are usually knowledgeable in the proper application of and heating of their fluxes. Usually, insufficient solder in a wave process is related to insufficient preheat,dwell time, and flux app
Electronics Forum | Sat May 24 04:57:41 EDT 2003 | iman
Good Points made. Keen observation. Work-life is mainly about covering Ye arse and keeping the air smelling full of roses. most traceability systems that do cover arse, comprise elements such as : 1) Lot no. control - link to production schedule /
Electronics Forum | Tue May 20 11:32:38 EDT 2003 | JB
So far we haven't had any problems with air in the syringe, but in the process of replacing the old syringe is were we had the problem. I'll keep your tip in mind if we ever have the need to get air out of a syringe though. Thanks for the info. JB
Electronics Forum | Fri May 23 03:39:06 EDT 2003 | mantis
Hi Chris, I found this site to be very useful and explanitory while calculating the sigma level of or company. http://www.isixsigma.com/sixsigma/six_sigma.asp It has explanations on anything and everything process control related. Regards,
Electronics Forum | Thu Jun 12 10:45:58 EDT 2003 | davem
I believe the Delta T you're referring to is the delta between the highest and lowest thermal mass components on the given assembly when being processed through reflow.
Electronics Forum | Thu Jun 12 04:54:45 EDT 2003 | ronih
I need active solder paste to overcome solderability problems - I believe it have to be washed out, the issue is not the cleaning process only the paste (flux) activity level.
Electronics Forum | Wed Jun 18 10:42:07 EDT 2003 | caldon
Frank- Dreamsniper touched on something I totally forgot about....DROSS.....This is a subtle way for $$$$ to be lost. If it is silver and Shiney...it does not belong in the dross recycle bin. That is good Solder being tossed. You can also add into