Electronics Forum | Fri Jun 29 05:50:27 EDT 2001 | nifhail
Thank Dave, your information was really helpful. Now that I have another few thousands of old datecode PCBs which has an Entek and HASL finished. Entek PCBs are about 6 � 1.5 years old and HASL boards are at 1 - 2 years old. To make it worse, s
Electronics Forum | Sat Jun 30 04:43:09 EDT 2001 | brendan
Hello We introduced OSP finish on some of our products but now need to add some discretes at the end of the process. From my little knowledge of OSP, this is difficult. We'll SMT the boards and transfer them to another site for further processing.
Electronics Forum | Wed Jul 04 10:40:51 EDT 2001 | nifhail
I have thousands of old datecode PCBs which has an Entek and HASL finished. Entek PCBs are about 6 � 1.5 years old and HASL boards are at 1 - 2 years old. To make it worse, some of them came in the loose form, no vacuum seal� nothin�. As for the HA
Electronics Forum | Mon Aug 13 18:16:31 EDT 2001 | fmonette
Be very careful how you perform the removal process if you want to re-use BGA/CSP devices. As you are aware, the majority of these components are classified as moisture-sensitive by the manufacturer. This means that if they absorb too much moisture
Electronics Forum | Sun Jul 15 20:10:09 EDT 2001 | Danial
What is the best method to repair Warped PCBA. Obviuosly twisting it back to make it flat would be a disasterous. The method that I've tried wold be mounting the assembled board to the flat holder with the clamp and bake them at 120 Deg C for about 4
Electronics Forum | Wed Jul 25 13:39:12 EDT 2001 | loriannplummer
I have been re-evaluating the way we do our visual inspection process due to its apparent ineffectiveness. We recently tested this by introducing 6 obvious defects on one assembly and gave it to one of our "esperienced" visual inspection operators. 2
Electronics Forum | Wed Jul 25 13:43:53 EDT 2001 | loriannplummer
I have been re-evaluating the way we do our visual inspection processes due to its apparent ineffectiveness. We recently tested this theory by introducing 6 obvious defects on one assembly and gave it to one of our "experienced" visual inspection ope
Electronics Forum | Sun Jul 29 21:23:27 EDT 2001 | nifhail
When carry out the contamination test,do we measure for Chlorides on water soluble and No-clean fluxes? 1) What is the equivalent factor for machines developed to test the board cleanliness, Omega-meter vs Ionograph vs Zero-ion. 2) What values do we
Electronics Forum | Fri Aug 03 15:58:07 EDT 2001 | arsmoriendi
Hi again! First thanks to all for your help. Second, i beleive that i need to clarify something, the unsoldered component was caused due a missing window in the stencil, the process engineer leave the stencil in the production line after i
Electronics Forum | Sat Feb 05 09:01:15 EST 2000 | Dave F
JS: The issue is not how efficiently/effectively that you can run your placement machine, probably. The issue is how efficiently you can run that part of your assembly process that is the bottleneck. Other than improving quality, optimizing any pa
winsouce.jpg)