Electronics Forum | Tue Aug 24 14:33:53 EDT 2004 | Rush Fan
We took delivery on a new DataPaq system about a year ago. This included the ROS software. Best thing we ever did for our reflow proces. The price is right, too.
Electronics Forum | Thu Aug 19 08:22:05 EDT 2004 | Rafal M.
Hello. I have a problem with reflow soldering of PCBs with golden pads. Peste explodes in the oven. I don't know in witch phase of process (in what point of profile) it happens. It's the reason of problems with golden pads - it's dirty when going out
Electronics Forum | Fri Aug 27 11:57:49 EDT 2004 | Dreamsniper
REFLOW SOLDERING PROCESSES AND TROUBLESHOOTING: SMT, BGA, CSP AND FLIP CHIP TECHNOLOGIES By Ning Checng Lee http://www.argospress.com/Resources/business/book-0750672188.htm regards,
Electronics Forum | Thu Sep 09 07:56:28 EDT 2004 | mksslcheng
A fresher goes in SMTonline ,I would like to learn the knowledge that how to embed and high temp. solder thermocouple into PTH hole while profiling board ,where the bead of T.C be located ,whether in PTH hole or protrude the bottom surface of board .
Electronics Forum | Sun Sep 12 21:08:07 EDT 2004 | mksslcheng
Could someone recommend me the manufacuter who is produce Kapton tape or Alum. tape or Epoxy ,I want to profile wave soldering .You would be appreciated if you can provide its website .
Electronics Forum | Wed Sep 15 15:16:29 EDT 2004 | davef
It's going to be tougher to get the recipe correct on his bad dude. [As you'd expect.] But to start with, you need to run a channel of your profile on one of the open balls of this particular heat sinked BGA.
Electronics Forum | Thu Sep 23 08:01:40 EDT 2004 | John
Have anyone experience with temp.profile for selective soldering?Could you give me more information about that? Thank you!
Electronics Forum | Tue Sep 28 21:38:43 EDT 2004 | Grant
Hi, We are running a SlimKIC, and it's great, but the thermocouples are expensive, and we want to leave them on each product, and not reuse them, as it's faster to profile. Is there any third party sources of thermocouples? Regards, Grant
Electronics Forum | Thu Oct 21 16:31:23 EDT 2004 | Tony
I have a component manufacturer that is using Sn/Ag/Cu plating on chip caps and resistors. Does anyone have any information on compatability with Sn/Pb paste. Are any changes in profile required? Is the reliability of the solder joint at risk? Tony
Electronics Forum | Wed Nov 10 17:55:37 EST 2004 | mdang
How can I profile the HVA102 so it can bring up one zone at a time? This machine is 1996. Thanks, -Michael
