Electronics Forum | Fri Jan 07 19:22:29 EST 2000 | Dave F
100 MHz or Mbps and BT => BaseT => Base Ten. You can purchase interface cards from a variety of sources on the net (www.milestek.com is fairly maroon compliant, which is why I like 'em). In addition to the interface card, each type of point-to-poin
Electronics Forum | Tue Jan 04 16:20:50 EST 2000 | John
My company is considering purchasing a depaneling press from Pioneer-Dietecs. Our initial evaluation has been very positive; however, in a recent meeting a question was raised about the amount of stress induced in the pcb/components during depanel.
Electronics Forum | Fri Dec 17 18:21:43 EST 1999 | Clarissa L. Ortner
We are a small start up. We will be buying a stenciling machine and semi automated pick and place. ( We have the oven) We are presently stenciling without any assit and loading leadless parts only(no fine pitch) by hand. We need to improve thrupu
Electronics Forum | Tue Dec 21 12:47:25 EST 1999 | Larry
Clarissa, Like any used equipment, make sure both you and the dealer know what you expect from the machine. Ask questions! Make sure you understand what is involved in the refurbishment, if anything. Things like Technical support will be important if
Electronics Forum | Thu Oct 28 15:28:07 EDT 1999 | Bill Haynes
Hany, ESD mats, in my opinion, are very important. Why jepordize the quality of your product. We use sheets of stainless steel around all areas that are ESD sensitive and ground them to the machines. Of course they are no good unless the people st
Electronics Forum | Wed Aug 25 09:51:37 EDT 1999 | Mike F
Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. At a different
Electronics Forum | Wed Aug 25 10:05:56 EDT 1999 | Ray Hare
| Can anyone tell me where I can get a good lightweight material to use for a soldering fixture? I need to make various fixtures to hold LED's vertical during the soldering process, and keep them from floating up off the board surface. | | At a dif
Electronics Forum | Fri Aug 20 11:24:54 EDT 1999 | Chuck B.
I am being asked, by my vendor and Purchasing people about converting from Tin/lead pads on P.C.B's to Electroless Tin Plating. Can any one tell me what I have to change in my SMT process (paste, reflow, etc) If any? I ran one P.C.Board and I
Electronics Forum | Mon Aug 09 15:30:55 EDT 1999 | Dewey
Greetings, Would like to buy a 3 phase UPS for our Mydata TP11. Been looking and generally, sales person's point of view, 10KVA @ $10,000.00 is what they recommend. Seems a lot to me??? Called Mydata and suggested 2.2KVA per phase. I would purchase
Electronics Forum | Wed Jul 28 14:00:23 EDT 1999 | Mike Konrad
I would recommend Zestron's Vigon SC200. It does not require a rinse as long as you cleaner is equipped with a wash solution filter to filter out the solids. Zestron # is (888) 999-9116. The toll-free # is frequently busy� If so, try (703) 589-11