Electronics Forum | Thu Mar 04 17:56:17 EST 2010 | rmitchell
Hi, When we load a recipe (oven profile) on our heller 1809 the pc screen goes black, the oven turns off then comes back on and the error is communications with oven was lost. Anyone seen this error before? rob
Electronics Forum | Mon Aug 31 09:53:59 EDT 2009 | fujiphil
after sending all the datas.... proper, program and status... Re-boot the machine...
Electronics Forum | Wed Sep 02 08:03:24 EDT 2009 | kircchoffs
disable windows firewall
Electronics Forum | Wed Aug 26 17:06:56 EDT 2009 | andoe
when i transmitt data to the cp6 every thing seems to go okay until the end and i get a -- "A21E transmission error". i have checked the cable (i can program my IP3) any ideas? thanks ron
Electronics Forum | Sun Aug 30 15:32:33 EDT 2009 | jimmyboz
most fuji error codes are 8 digits, A21E is 2100A21E, it is a report from the MCS that transmission has failed (we knew that) Hit control E from the main screen of the MCS, there should be another error reported from the cp6, ie. 1101000 is x data ou
Electronics Forum | Fri Mar 05 08:06:39 EST 2010 | rgduval
Rob, Had that issue early on when we hooked up our Heller. For us, the problem turned out to be the serial communications port on the computer. I can't say we had the black screen, but, we had comm errors. I'd check the following: 1. Cable betwe
Electronics Forum | Tue Mar 23 09:31:39 EDT 2010 | rmitchell
Hi, To provide closure and help the healing process and maybe benifit someone else down the road... The problem was the UPS battery had gone dead. Back side of oven, near the exit end. rob
Electronics Forum | Wed Mar 24 14:45:22 EDT 2010 | wrongway
Thanks Rob for letting use know what the cause was as we have a heller 1809 oven thats a 2005 year what year is your oven? Im thinking our battery probaly doesn't have a lot of life left yet either Thanks again
Electronics Forum | Tue Sep 01 05:28:49 EDT 2009 | aj
start skipping out some parts and try to transmit? could be a dodgy part data... Best thing to do is skip out everything except one part and see how you get on with the transmission and work from there. If it transmits start addin a few more until y
