Electronics Forum | Thu Sep 30 16:28:51 EDT 2010 | 18424
Hello All, looking for some help from you guru's. I have several Enig boards with solderability problems. Components ranging from 0402's to ssop's. Using AIM W/S leaded solder paste, profile is beautiful and has been for years running the same produc
Electronics Forum | Thu Jan 13 20:40:47 EST 2011 | eadthem
properties > settings > troubleshooting > Set hardware acceleration to NONE > apply OK apply OK reboot. without this any attempt to take a screen shot of the program will not save the image (because in a fruitless attempt to speed it up they have pr
Electronics Forum | Tue Nov 30 11:42:03 EST 2010 | hegemon
A simple question with very complex answers... But to simplify, you could start at this. Water soluble fluxes are cleaned using (typically) de-ionized water, using a spray wash method. Sometimes a saponifier is added to the water to help it get
Electronics Forum | Thu Jan 20 23:59:30 EST 2011 | jeffr
These machines have three heads... Head 1 (jaws 0.7mm x 4mm)0603 up to small tantalum. Head 2 (jaws 3.0mm x 20mm)small tant up to PLCC44 or SOP28. Head 3 No jaws, uses just Vision. Can do Large tantalum up to QFP208, however can only take a single no
Electronics Forum | Tue Jun 28 11:45:27 EDT 2011 | jax
I have multiple machines consisting of a mix of the following: Single beam Lightning head machines (Advantis, Lead Screw) Dual Beam Seven Spindle machines (Genesis, Linear Drive) Single Beam Seven Spindle Machines Advantis, Lead Screw) The vintage ra
Electronics Forum | Fri Mar 09 04:10:18 EST 2012 | grahamcooper22
Hi, I've been supplying Totech dry cabinets in the Uk for 10 years and in that time I've realised the only places to find the correct MSL level is on the dry pack the devices are shipped in or by spending hours on the internet or speaking to the devi
Electronics Forum | Tue Jan 10 19:01:13 EST 2012 | carvincorp
I was wondering if anyone else out there using the Vectorguard system by DEK has had problems with leaking air bladders. We started using a 29 x 29 frame about a year ago, and already, we've needed to send the frame back 3 times for repair due to int
Electronics Forum | Mon Jan 30 13:19:37 EST 2012 | deanm
Now knowing that its a Quad, I'm assuming it has QuadAlign which spins the part it just picked in a beam of light and a sensor measures the length, width and height of each part. If it falls outside of a defined range, it will throw it in the dump bi
Electronics Forum | Tue Aug 21 19:24:15 EDT 2012 | rway
Checksum will work if all your doing is analog/passive testing. Checksum systems do not have digital test capability. I would recommend a Teradyne z18xx system. We use 8 of them in our plant and have been for years. Used, these systems range from
Electronics Forum | Fri Aug 31 13:51:33 EDT 2012 | joeherz
First off - There should be no issue with washing your OA/water soluble boards with the other customer's no clean units provided that the recipe being used has been validated to effectively clean each product. If your supplier is using a batch syste
.gif)
.gif)
winsouce.jpg)