Electronics Forum | Fri May 01 00:27:12 EDT 2009 | rodrigo
Hi all, We had a servo amp replaced (SA-6) and the machine worked with no problem for the first panel (this panel of 10 only needs a TQFP100 from the MTU). Then I got the "Servo NG" error again. One of the servo paks showed a "7" on the LED. The err
Electronics Forum | Tue Aug 18 22:22:43 EDT 2009 | comatose
Assuming you want to run 8 hours a day and 5 days a week, you need a sustained throughput of 2.5k components per hour. With fine pitch, futzing around, setup, etc you should really look for machines rated in the 4k to 5k per hour range. That's not sc
Electronics Forum | Wed Sep 02 16:41:44 EDT 2009 | pcbcleaning
Advanced Cleaning Solutions is a Johnstown, PA based electronic manufacturing service provider (EMS) with more than 3,500 square feet of ESD safe facilities. Our services include precision PCB cleaning and ionic cleanliness testing/verification usin
Electronics Forum | Sun Oct 11 21:19:51 EDT 2009 | fulldrawmike
we have both flexjet and flexhead, we also have the new inline 7 head on some genesis dual beams we just put into operation. If you have a choice in flexjet heads take the inline 7. The flexjet 09 head is very labor intensive, stay away from them, e
Electronics Forum | Thu Feb 04 02:46:39 EST 2010 | dilogic
OK, here we are: 1. OS is OS&2 2. Sw. is USOS V1.14 3. GSM1 4. 2 Flex2 heads 5. Problem is on the front head 6. No 7. No 8. It just stops in the middle of the placement phase, with the head over PCB area. Usually 2 parts are still held on the nozz
Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe
Electronics Forum | Fri Oct 01 17:59:13 EDT 2010 | rway
Your real problem is further upstream. The limitations of your AOI aside, first find out why your leads are being lifted. Is it through handling or are they from the reel that way? To address your AOI question, Hegemon is correct, coplanarity inspe
Electronics Forum | Thu Oct 14 17:10:37 EDT 2010 | hegemon
Heck, now I look up and see this is SMTdotNET. Do I get banned for asking a TH question? So here's my first real TH issue after living so long in the SMT world. We are having a sudden issue in what has been a stable process for quite some time. I
Electronics Forum | Thu Jan 20 08:08:24 EST 2011 | deanm
Because we build Class 3 assemblies, our company has formal inspection steps on our routes. CCA's go through surface mount and then an operator inspects the solder joints for defects and corrects them (touch-up). Following this they go to formal insp
Electronics Forum | Tue Aug 23 13:50:46 EDT 2011 | cyber_wolf
The time it takes to PM a CP643 is really dependent on how much you run the machine. If you are running 3 shifts obviously the machine will require more attention than one shift. You are probably not going to want to hear this, but it does take a su