Electronics Forum | Mon Jul 29 19:21:58 EDT 2002 | davef
Look to: * Your flux supplier's recommendations to baseline your recipe [similar to using your paste supplier's recommendations for setting your reflow recipe] * 7530 'Guidelines for Temperature Profiling for Mass Soldering (Reflow and Wave)' for gui
Electronics Forum | Fri Oct 04 16:17:50 EDT 2002 | ksfacinelli
I am interested in recommendations for International Purchasing Organizations (IPO's) that would help in sourcing. The agencies should be adept in electronics acquisition in the far east. Please send recommendations off list to: ksfacinelli@yahoo.
Electronics Forum | Thu Oct 24 15:02:16 EDT 2002 | seand
Hello Yannick, Have you brought this concern up with your supplier? I would recommend speaking with your flux and paste provider to gain additional insight and recommendations for resolving the concern. Good luck, Sean D.
Electronics Forum | Fri Aug 01 12:35:54 EDT 2003 | blnorman
Kester recommends that we store our 1400 gm tubes on the tip. Our documentation is based on their recommendation. The Alpha past we used was stored horizontally, but that was because the flux readily separated from the metal.
Electronics Forum | Tue Aug 03 14:46:25 EDT 2004 | russ
We recommend to the designers "the smallest diameter that you can get away with", that will help reduce the solder scavenging into via diring reflow. unless you are planning on having them filled as Dave F mentioned. Russ
Electronics Forum | Sun Sep 12 21:08:07 EDT 2004 | mksslcheng
Could someone recommend me the manufacuter who is produce Kapton tape or Alum. tape or Epoxy ,I want to profile wave soldering .You would be appreciated if you can provide its website .
Electronics Forum | Wed Sep 22 22:56:44 EDT 2004 | davef
Talk to 10 people and you get 10 recommendations for pad layout. So far, here's number 3 [after IPC and AVX]. We suggest: * Use the IPC recommended standard. * Change from that standard when someone gives you a documented reason to change.
Electronics Forum | Thu Nov 03 20:59:33 EST 2005 | SJ
We are a small-medium size CM and are looking to convert to Lead-free. Any recommendations for good (Price, Quality, Throughput) Reflow Ovens and Wave Machines for Lead-free will be greatly appreciated!
Electronics Forum | Tue Nov 15 17:01:29 EST 2005 | John S.
My company is looking at purchasing its first router. We've always used press type depaneling systems before. Can anyone make any recommendations regarding the Cencorp 1200 SR and the Tyco Smart Router? Thanks in advance, John S.
Electronics Forum | Fri May 19 13:40:36 EDT 2006 | grantp
Hi, Sorry to drag this thread up again, but we were recommended to change the wave to SAC305, but is everyone recommending SN100C? That seems to be the feeling on this thread. What flux is used? Regards, Grant
winsouce.jpg)