Electronics Forum | Mon Mar 04 16:15:32 EST 2013 | dyoungquist
A little oil on the dough, then the pizza sauce, then the toppings. Next place it in the reflow oven using a standard leaded reflow profile, might have to slow down the belt a bit. Should turn out a tasty pizza. ;-)
Electronics Forum | Sat May 18 21:52:30 EDT 2013 | kumar_antom
Hi guys, Whats actually Delta T ? As i know,its applicable for reflow profiling. Recently my superior asked me whats the Delta T for heating settings on my reflow ? Does Delta T applicable for heater setting on my reflow ? Pls advise as i m puzzl
Electronics Forum | Tue Oct 17 18:36:49 EDT 2000 | Philip Reyes
Yeo, These are possible rootcause of that defect and you can evaluate. 1. Orientation of the capacitor, maybe the cap is located behind big component. 2. Reflow profile, check the profile on that side. 3. Yes, check also the mounting force. Philip
Electronics Forum | Wed Jun 20 11:44:19 EDT 2001 | Steve
We use a universal recipe for 90% of our products. But, I had to develop a temperature profile for each PCB to know that I was getting the correct temperature at the PCB. You may need to work a weekend or a couple of late nights to get the data. Go
Electronics Forum | Wed Apr 02 10:51:17 EST 2003 | kmorris
Myu: Did you have to change your reflow profiles when you changed from 609 to 709? What ramp rate & time over liquidus are your profiles at?
Electronics Forum | Mon Jul 14 20:49:22 EDT 2003 | Thomas
Hi Need some help here. Anybody got the recommended profile for Sn50/Pb50 solder paste. Thanks.
Electronics Forum | Tue Jul 15 21:05:55 EDT 2003 | Thomas
Hi Dave, I saw many of your outstanding comments and postings. Can you save me this time on the profile recommendation ??
Electronics Forum | Wed Nov 03 09:40:07 EST 2004 | vinod
Thanks Grant. I have Heller 1707 and it has built in thermal profiler. As a start up We won't be able to buy kic, but I have used in past and it is great.
Electronics Forum | Wed Aug 24 09:42:23 EDT 2005 | james
That is what I was looking for. The profiles did not make much sense to me. We are getting alot of cold solder joints or bumpy solder joints.
Electronics Forum | Wed Aug 24 10:18:19 EDT 2005 | james
Well that Genius did it on this BGA. It does have a heatsink and absorbs alot of heat. It just stinks because the BGA cost over 1000 and I really can not scrap a board. But that first profile does not look correct for this board with the BGA esp.