Electronics Forum | Fri Nov 14 05:33:47 EST 2008 | bartlozie
I do have exp in setting up the machine, if you explaine me the probleme, maybe i can help you out. (pictures?) regards Bart bart.lozie@page.be
Electronics Forum | Thu Apr 12 16:59:24 EDT 2007 | flipit
If you want an inexpensive, good, somewhat dedicated, solution, then I would use a desktop wave pot like Wenesco or better yet Air Vac. The PCBRM10 or PCBRM12 from Air Vac may still be available. Can find on Ebay also. They have a quick change, pr
Electronics Forum | Wed Mar 28 09:32:27 EDT 2007 | realchunks
Solder iron robots tend to miss solder joints from time to time. The wire feeder systems are the key to these machines. Most use the edge of the board for alignment is another reason they miss. If you have SMD close to the thru-hole, the robot may
Electronics Forum | Sat Apr 14 08:23:29 EDT 2007 | davef
Laser soldering suppliers are: * Seica [low cost firefly A-30]; 45 Osgood St 1st Flr, Methuen, MA 01844; 978-683-8356 F8357 seicatestsolutions.com/pages/24/A30-Firefly-Solder-Station.php; Dave Sigillo [GM] sigillo@seicausa.com * Leister Process Tech
Electronics Forum | Wed Mar 28 12:46:50 EDT 2007 | realchunks
Rob is right, you do need to dispense paste or pre-forms when using a laser. Although the Panasonic Soft Beam has a wire despenser. I've seen laser soldering and it does work on smaller stuff. Doesn't work well on connectors even after preheating.
Electronics Forum | Thu Jul 06 03:43:22 EDT 2017 | jamesbarnhart
Electronic devices required higher speed, I/O capability, and density to meet standard requirements. Automated robotic soldering solutions that meet the demands of applications are too challenging for hand soldering. Manual soldering, even with the m
Electronics Forum | Wed Jun 21 11:30:27 EDT 2017 | ranap121212
but we do not have laminate preheating on robots. There is no flux separate application, the flux is in the soldering wire
Electronics Forum | Wed Jun 21 19:01:48 EDT 2017 | mac5
Try baking the boards; you may have a moisture problem.
Electronics Forum | Thu Jun 22 09:50:48 EDT 2017 | capse
Are you using nitrogen in your soldering process?
Electronics Forum | Sat Jun 24 07:49:58 EDT 2017 | ranap121212
@Capse, No but the machine has such a construction, I can not this change