Electronics Forum | Fri Sep 14 10:36:03 EDT 2007 | slthomas
After considerable head scratching yesterday afternoon I've determined that this is a symptom of flaky wiring, a loose connector, etc.. The head 1 mount vacuum bit isn't changing all the time on the blow off, and it errors out at that point. When I r
Electronics Forum | Tue Nov 13 13:47:55 EST 2007 | ratsalad
d0min0, Have you opened the file and looked at it? I don't know if you know what a gerber file looks like, but if you don't you can always compare it to a .gbx file that you have that already works. There is no standard on file extensions for gerb
Electronics Forum | Thu Jan 10 03:19:49 EST 2008 | chrispy1963
I have read all the replies here and have yet to see this one which I know works when our fids are HASL and distorted, thus unable to seem uniform enough for the vision systems on our MPM's or MyDatas to see them clearly. Using a stainless steel nee
Electronics Forum | Thu Dec 06 10:15:14 EST 2007 | 18424
I am looking for people that are having problems primarily with test of their product after reflow/production. Has anyone experienced a great solder joint but the component still fails test? Has anyone had dewetting of atmel components, pull back of
Electronics Forum | Thu Mar 20 07:58:12 EDT 2008 | cyber_wolf
#1Run a Fuji gold board and see if the problem persist. Is your board clamp slipping? Fid camera tight? etc.. To see if you have a Y axis positioning problem: 1.Put the machine in mecha check 2.Go into Y-axis 3.Place a dial indicator so that the st
Electronics Forum | Sat May 31 09:44:56 EDT 2008 | gregoryyork
looks like the board has gone through and not actually fluxed properly,trying hand applying and it should fix it. IF it still occurs put the pallet through without pcb and without flux and see what residues come off in the wave. residues you are seei
Electronics Forum | Wed Jun 04 11:25:09 EDT 2008 | grics
Hey! Thanks for the response... I was getting a little lonely out here. Anyways, it has absolutley noting to do with the quality of Aegis or Valor. I have actually heard nothing but great things. As a matter of fact, Aegis will be down tomorrow to
Electronics Forum | Thu Jul 10 11:53:48 EDT 2008 | patrickbruneel
Jon, I believe were at a point now that all the problems related to the RoHS directive (not lead free only) are so abundant that they no longer can stay hidden. Here�s an article form the Swedish EIF http://www.evertiq.com/news/read.do?news=11736&c
Electronics Forum | Mon Aug 04 12:29:12 EDT 2008 | realchunks
If you are getting top side wetting, I doubt if this is a Delta-T problem. It also could be there is a lot of flux on the top side of the board stuck between the connector and the board. This is easily checked by fluxing and not running th eZ axi
Electronics Forum | Thu Aug 21 05:08:09 EDT 2008 | ihamon
Hi, We had a electric failure on a printed wired board after a few hours of functionning. We determined that the failure was caused by a open circuit in the PCB internal layer near to a via. We performed a microsection but unfortunately, it seemes t
.gif)
