Electronics Forum | Thu Apr 19 02:49:07 EDT 2007 | ray
I observed some black dot or some oxidation occured on chip termination on pcba reflowed fews weeks ago as buffer stock. The solder joint and fillet wetting is good and shinning. It is an acceptable or defect condition per IPC standard/requirement? W
Electronics Forum | Fri Jan 25 09:19:43 EST 2008 | realchunks
Use a fuse holder. It should work the same.
Electronics Forum | Thu Jan 24 16:58:11 EST 2008 | c111
Does anyone know if there is a SMT socket for a 1206 cap, I swear I used them in the past but can not find now. If you know of one could you provide a supplier name or web address. Thanks
Electronics Forum | Wed Jan 30 14:33:59 EST 2008 | c111
Thanks, But do you know where I can find a fuse holder without a fuse already in it?
Electronics Forum | Wed Jan 30 19:39:57 EST 2008 | Frank
I don't do any purchasing, so don't know where to look for just the holders. Just pay some kid to pull the fuses out when they come out of the oven and pop the cap in.
Electronics Forum | Thu Jan 31 08:13:07 EST 2008 | davef
Fuse holder manufacturers are: FIC, Littlefuse, Zierick, BEL, Bussmann. Their application-type surely can help you select the proper item to meet your requirements.
Electronics Forum | Wed Jun 12 08:01:04 EDT 2013 | mun4o
hi, i have problem with ceramic capacitor 10uF ±10% 16V X7R 1206.Problem is as follows:ICT ( Teradyne 8851 ) measured value 6 ?? 8uF ( about 70% of all lot).I decide that components ( samsung ) are defective.I buy one "type&reel" capacitors "Murata"
Electronics Forum | Tue Jun 18 03:16:46 EDT 2013 | mun4o
production lot is 4000pcs.About 70% of capacitors are out of tolerance ( +/-20%).There are 3pcs C=10u per PCB, in different location.Samsung capacitors wich we use are 1,5 years old - i checked this information from our supplier " Rutronik ".I have
Electronics Forum | Fri Jun 14 00:47:17 EDT 2013 | mun4o
Thanks , Reese.Yes , I check the capacitors with C-meter.When measured with C-meter , all capacitors are OK - +/-10% of the value. I can not underst?nd "Note: This is not a summation). Y5V -- -20% of nominal value, -part tolerance, -machine toleranc
Electronics Forum | Fri Jun 14 13:47:21 EDT 2013 | rway
Chances are this is not a component failure. First, these are passive components with passive testing on the ICT. He may have guarding issues, but more information is required as has been stated. Are all capacitors with the same P/N failing in dif
