Electronics Forum | Mon Mar 05 14:44:51 EST 2007 | daxman
Hey, I've seen a lot of AP25's with snuggers. I don't know if they all came with the pneumatics or not..but if you have the snugger reg. guage, just underneath the Z table, you should be okay. The fellas at goppm (www.goppm.com) have a lot of knowl
Electronics Forum | Fri Mar 02 10:43:05 EST 2007 | pavel_murtishev
Good afternoon, Could you tell me if MPM AP25/HiE can be equipped with side clamping system (snuggers)? It would be great to know the price of such modification as well. Thanks in advance. BR, Pavel
Electronics Forum | Mon Mar 05 15:05:57 EST 2007 | Hussman
Yes they can.
Electronics Forum | Tue Mar 06 08:15:18 EST 2007 | realchunks
Now you guys have to use "Tim" as your screen printer! LOL!
Electronics Forum | Tue Jan 13 19:16:03 EST 2004 | pjc
Dedicated tooling uses what MPM calls an "H" tower. You mount the board support plate (dedicated tooling) on top of the H tower. If boards are only single-sided SMT, meaning only components on one side, the board support plate is flat with vacuum hol
Electronics Forum | Mon Apr 24 09:43:47 EDT 2006 | printerman
What you describe is the X snuggers fitted into the workholder which do need either a flat board or good vacuum to work. There are several solutions. One solution you can try yourself is to use Vacuum cups, ( bellows type) designed into the workholde
Electronics Forum | Wed Nov 20 16:27:15 EST 2002 | pjc
FYI: MPM does in fact offer alternate board support tooling than the vacuum box system. They have the X and Y snugger tooling, which clamps the board and uses magnetic support pins. If you are looking at a used UP2000, check to see what tooling it ha
Electronics Forum | Tue Mar 06 08:33:40 EST 2007 | cardinal
You can get a topside edge-clamping system to fit your AP HI E printer from Gridlok. They make a universal tooling system and topside edgeclamping system for the AP series and UP 2000 series printers. The Y snugger tooling option when ordered with t
.png)