Electronics Forum | Tue Jul 19 12:29:20 EDT 2005 | cyber_wolf
How does the mount plane change if the surface of the board is located in the same place every time ? For example: If you put 2 boards side by side on the Y wagon : one board measures .020" and the other .200" the surfaces of the boards are going
Electronics Forum | Fri Nov 10 09:13:34 EST 2006 | russ
Dave hit the cons pretty well for type 4 type 4 is used when you have extremely small apertures and type 3 will not fit into them or release adequately basically. I have not yet had application that requires it but got very close once, .007 circle
Electronics Forum | Sat Oct 25 13:36:39 EDT 2014 | sonavc
Hi everyone, hope you can help me with this machine I bought used and after it is set up , it runs good, home position. I can click the tab Start, and Setup. But I can't click the tab I/O , edit or system. Because, I think I can't log in the Level
Electronics Forum | Tue Jul 19 08:12:23 EDT 2005 | davef
We agree with Rob. It looks like either kiss is blowing the paste around. It could be: * Nozzle id too large. * Kiss is occuring after the head has moved from the component. 0408%20MS%2001.jpg - Paste is not missing on the bottom-center pads. It is
Electronics Forum | Tue Dec 23 09:13:12 EST 2014 | jeff701
I'm in a manufacturing environment with a very high mix of boards, and some low-mid volume. A "large" production run might consist of 100 boards. Volume: There are numerous boards that have a volume of 1-3 pieces. There are a few boards with an annua
Electronics Forum | Fri Nov 17 14:42:06 EST 2006 | billwestiet
Mark, This is a big topic. Where are you located, it would probably be best to hook you up with someone in your area. Anyhow, lead or lead free should be based on whether the circuits are lead or lead free. I would guess that cell phones would all
Electronics Forum | Tue Jan 25 09:25:23 EST 2000 | Dave F
Kris: I can appreciate your hesitance. Done correctly with proper planting and fore thought, the change to no-clean affects every part of your operations operations from purchasing to receiving and on down the line. Two things: 1 Following with y
Electronics Forum | Tue Dec 23 12:34:27 EST 2014 | deanm
I'm sure you considered acquiring a second FX-D and run them inline, the first dispensing half the board and the second the other half. That would automatically double your throughput. You wouldn't have to worry about a new process, consumables, et
Electronics Forum | Wed Jul 20 16:08:34 EDT 2005 | grantp
Hi, I think the comment about the board height is because the MYDATA checks the board height each time it loads a tool so this is eliminated from being an issue because the machine knows the PCB height. I don't think it's so much what height the PCB
Electronics Forum | Thu Jul 21 08:27:05 EDT 2005 | grantp
Hi, Yes, that's an idea, but from my experience with MYDATA, it would fail test, and the machine would either know it's lost the component, or it would not know, and the component would not be on the pad because the machine would think it's mounted
winsouce.jpg)
